Hardware & Tools

Wood flat spade bits type D
Sizes: 6-40mm (1/4"--1-9/16")
Length: 152mm--400mm (6"--16")
Packed in plastic bag, double blister

HSS twist drill bits fully ground
DIN340 long series, 118/135 degrees
Sizes: 1--20mm, special sizes are available
Material: M2, HSS9341

Material:M2AL, M35
Charateristics: fully heat treated with HRC 62-66
Cutting holes on thick HSS sheet, rail
Used on magdrill to drill holes

Twist Wire Cup Brush
Diameter: 65mm 75mm 85mm 100mm 125mm 150mm
T: 20 21 22 23
Fill Type: 0.35mm 0.5mm, 0.8mm
Red and blue colors are available

ANTI-KICK-BACK Teeth, Silence Design TCT Saw Blade
Sizes: 110-900mm (4"-36")
Teeth numbers: 12-120T
For cutting nailed wood, hard wood

Diamond segmented core drill bits
Sizes: 25-152mm (1"--6")
continuous segment for sizes below 52mm
4-7 pcs of diamond segment

TCT Saw Blade for cutting laminated, MDF, Hard Wood
Sizes: 110-550mm (4"-22")
Teeth numbers: 12-120T
Cutting cutting laminated, MDF, Hard Wood

TCT Saw Blade for Hard Wood
Sizes: 115mm (4.5")
Teeth numbers: 40T
ATB Teeth
also other teeth numbers are available

ISO529 Metric coarse and fine thread
Thread making: Fully ground
Material: M2, M35
Finish: Bright, Tin, TiCN, TiALN

Diamond saw blades
Cold/hot pressed
Brazed, laser welded
For cutting concrete, granite, marble, refractiry materials, asphalt etc.

HSS Twist Drill Bits; Jobber Drill Bits
Materials: M35, M2, HSS 9341, 4341, 4241
Standard: DIN338, 340,345,1897, ANSI B94.11M, ISO235
HRC: 62-66

Flap disc
fiberglass backing aluminium oxide
material A
Grit size 40-120#
sizes from 100-180mm...

Inch sizes: 7/8"-1"-1-1/8"-1-1/4"-1-1/2"
Metric sizes: 22-25-29-32-38mm
Mandrel: 3/8" hex shank
Adatpor with 1/2-20 UNF threads to 5/8-18UNF

Inch sizes: 3/4" 7/8" 1-1/8" 1-3/8" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2"
Metric sizes:19-22-29-35-38-44-51-57-64mm
Mandrels: 7/16 hex, 1/4" round shank

Material: M2, M35
Sizes: Step 4-12mm, 4-20mm, 6-30mm etc.
Bright or Titanium finish
Application: Spiral fluted for cutting holes on metal sheet

SDS max shank hammer drill bit
Diameter: 12-40mm
Length: 340-1320mm
Packed in plastic hanger, tube

Duel Nibbler for cutting steel plate copper/aluminium plate plastic/fiber board
use with pneumatic or electric drill at speed 1500-3000RPM

NIbbler for cutting steel plate copper/aluminium plate plastic/fiber board
use with pneumatic or electric drill at speed 1500-3000RPM

Inch sizes: 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4"
Metric sizes: 19-22-29-38-44-57mm
Mandrels: 3/8" hex; 7/16" hex
Adaptor

Flap disc
fiberglass backing silicon carbide
material: C
Grit size: 40-120#
Application: Grind and polish non-metal items