Valves

1.3 pieces ball-type
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Large dimension EPDM sealing flange type butterfly valve
Why choose us?
1. Casting by our foundry factory
2. Zero leakage
3. Superior sealing

Supply pinch valves aluminum DN25-400, pinch valves, cast iron/steel/stainless steel, hose valves pneumoperitoneum, rubber nozzles to hose va

flange solenoid valve, pilot operated valve for water, air oil
1) cast iron body,also stainless body
2) flange series
3) max 200mm

• Threaded, 2-Piece, Full Port, Brass Ball Valve, 600 PSI WOG
• Size: 1/4" to 4"(DN 8 to DN 100)
• Approvals:CSA, UL, FM, NSF

1. Structure:Dresser net
2. Working pressure: 0.4-0.6MPa
3.Working temperature: NBR: -40℃-82℃, Viton:-29 - 232 Celsius degree
4.Made in China

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

1. Its Material Is virgin PVC/CPVC/PP resin;
2. Range of Size: 1/2" to 4"
3. Rapid 1/4-turn on/off control.
4. Color: White/blue/gray

the valve is called ammonia globe valve .which is used for ammonia cold room pipe . Which control the flow of ammonia by operate the hand wheel .

plastic pressure reducing valve with 1/4" quick fitting.
size:1/4" x 1/4".
FDA & NSF approved plastic POM.
used in water filtration and RO system.

1.3 pieces ball-type
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

The pneumatic actuator is a double acting cylinder. The standard supply pressure for the pneumatic cylinder is min. 6 bar.

DESIGN AND MANUFACTURING STANDARDS
Design Standard
API 6D, API 608,BS 5351, ASEM B16.34
Face to Face Dimension
ASME B16.10, AP

Differential pressure: 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range: -20 to +85°C
Coil insulation class: F

YJZQ valves is used for control and stop oil in the hydraulic circuity,with reliable seal ability,easy operation and good outlook.

Automatic Drain valve, 2/2 direct action,1/8" or 1/4"or 3/8" or 1/2" brass or stainless steel body, IP65 ,Viton seal,open 0.5~10s ,close:0.5-4.5min

1-way restrictive valve is consisted of needle valve and 1-way valve in parallel. It is used to adjust the flow in one way, and reverse back freely

1. VU hydraulic check valve;
2. poppet type, steel;
3. pressure up to 500bar;
4. burst pressure 0.5bar;
5. female BSP threads

As a gas modulation device & a two-way switch device, 600S gas low-load pneumatic butterfly valve is suitable to ventilation and dust removing pipelin