Valves

HRPC brand threaded type high pressure ball valve:
1) size 1/8"~2"
2) female-male thread
3) FOB price $5.50
4) same as hydac valve

1. ISO 4401 Standard pattern subplates
2. Four main ports with NBR or FPM seals for different working position
3. With or without indicator lamp

Control vSingle seated control valve, double seated valve ,sleeve control valve with Linear actuator (travel (10-100mm)

ZIPO forged steel split three-piece body flanged end trunnion mounted ball valve
Design standard: ASME B16.34, API 6D, GB, GOST, DIN, BS, etc

Design for Vickers type directional hydraulic valves.
Rated Voltage:DC 12V/24V
NG6/CETOP5 type
Rated Pressure:21MPa
Insulation Class:F or H Class

1. throttle check valve;
2. working pressure up to 400bar;
3. BSP (DIN ISO 228) thread;
4. burst pressure 0.5bar;
5. heat treated needle.

1). Can't fire, not pollute the environment. Affected by temperature changes little .
2). Weight 28KG .

full port 2 way flanged
DN 13mm ~ 50mm
Carbon steel material
Imported O-ring
NBR/FPM airproof...

Our Brass Bronze Copper Foundry produce best casting which are machined. BSP threads are best suited for such Tank connections.

Design for Vickers type directional hydraulic valves.
Rated Voltage:AC Solenoid 110V/220V
NG6 type
Insulation Class:Class H

1. PED 97/23/EC Tested as safety valve in the hydraulic system
2. Six adjustable presetting pressure option
3. Direct acting and mounting

stainless steel valve,3/2 or 2/2, direct action,DC12~220V, AC24V~380V/5060Hz,Seal: NBR,EPDM,Viton,Valve body:SS316,Normally open/normally close/divert

FREE-Valve's Tank Bottom Angle Valves are designed for the convenient and fast discharging the material or samples

Explosion proof
DN3-250mm
Body material: SS304,nodular cast iron, special(WCB,SS316)
Voltage can be customized

Material:WCB/A105/LCB/LF2/CF8/304CF8M316/CF3/304L/CF3M/316L/F51/2205/ Model No.: PQ347F,PQ347H,PQ347Y, PQ367F, PQ367H, PQ367Y, PQ947F,TQ947H

Standard or Nonstandard:Standard
Structure:Control
Pressure:Low Pressure
Power:Manual
Material:Alloy...

Top Entry Ball Valve
Normal Size: 1/2"~40"
Pressure Rating:CLASS 150~2500
Design Standard:ASME B 16.34/API 6D /API 608/BS EN ISO17292/ISO1431

miniature high pressure brass 2 way solenoid valve half inch
Media: oil, gas, liquid
Sealing material: PTFE
Mode of action: pilot operated type

Applicable standards:
Design: API 6D, ANSI B16.34
Face To Face: API 6D, ASME B16.10
Flange end: ANSI B16.5, ASME B16.47
Fire safe: API 607

The main oart is the hollow free-ball float trap of stainless steel,which is the round float ball finely grind in this trap.