Valves

1. ISO 4401 Standard pattern subplates
2. Four main ports with NBR or FPM seals for different working position
3. With or without indicator lamp

hydraulic components ball valve
2 way manifold mounting
high pressure 315bar
carbon steel material

FREE-Valve's Tank Bottom Angle Valves are designed for the convenient and fast discharging the material or samples

1) carbon steel high pressure 315bar
2) DN 10mm~50mm
3) globe stop valve type
4) male thread connection
5) steel crooked handle

Top Entry Ball Valve
Normal Size: 1/2"~40"
Pressure Rating:CLASS 150~2500
Design Standard:ASME B 16.34/API 6D /API 608/BS EN ISO17292/ISO1431

The main oart is the hollow free-ball float trap of stainless steel,which is the round float ball finely grind in this trap.

1. Wet-pin solenoid design for lower operation sound
2. High working pressure and back pressure
3. Reliable spool switching

Material: cast iron, ductile iron, cast steel, carboon steel, stainless steel .
Design: ANSI, JIS, DIN, BS

Packing: plywood case for export
Shipping: by sea, by air, by express
Delivery time: 15-30days
Port: Ning bo, Shanghai

Flapper Type 5F6R Float Valve Cage
Investment Casting
Xylan Coating
ISO2001:2008
hydro test for Float Valve

1) Flexible wedge gate, which is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage.
2) Renewable seat

1) 2 way full port
2) high pressure 315~500bar
3) DN6~50mm
4) BSP, NPT, PT connectors 1/4"~2"
5) female-female, male-male thread

1.Five slots in valve housing for high pressure and long service life
2.Coil with terminal and conduit connected box
3. Standard interface

Basic information:
Pressure:CLASS 150~300
Size:1/2"-8"
Design Std:API 608,API 6D,BS5351
Product Material:ASTM A216 WCB,A351 CF8,A351 CF8M,A351 CF3

Min. Order:10 PCS;Packing:wooden case;DeliveryDate:45 days;PaymentType:T/T before shipment, L/C sight;Trademark:VK;Specification:soft sealing, sleeve

Material: cast iron, ductile iron, cast steel, carboon steel, stainless steel .
Design: ANSI, JIS, DIN, BS

Water control valves points diaphragm piston type and two kinds, the main component has a main valve and its attached catheter, guide valve, needle,

motorized ball valve
design std: API 600/6D
flanged std : ASME B16.5
face to face std: ASME B16.10
testing std: API 598

Top Entry Ball Valve
Normal Size: 1/2"~40"
Pressure Rating:CLASS 150~2500
Design Standard:ASME B 16.34/API 6D /API 608/BS EN ISO17292/ISO1431

The opening and closing of inverted bucket steam trap depends
On the density contrast of condensation water and steam ,the action
is accurate an