Valves

1. ISO and Cetop standard subplate mounting
2. For hydraulic system requires large flow
3. Stroke adjustment or end position optional

hydraulic operated check valve
bsp1/4 female thread
working pressure 500bar
burst pressure 0.35bar

1. Meter-in or meter out throttling adjustment control
2. With two throttle check valves
3. ISO, NFPA, ANSI Sandwich plate mounting

high pressure check valve
working pressure 500bar
burst pressure 0.35bar
bsp3/8 female thread dn10

1.Standard Porting pattern Sandwich plate design
2. Three different cracking pressures optional
3. A or B as leak-free blocking in channel

hydraulic operated check valve
bsp3/8 male thread
working pressure 320bar
burst pressure 0.04~0.1MPa

1. One or two actuator ports for leak free closure, optional
2. Vertical stacking assemblies
3. ISO and NFPA standard mounting

hydraulic check valve dn12
PN 500bar
DN 12mm
40LPM

1. Directional spool by a hand level operated
2. Smooth spool/poppet movement
3. Standard subplate mounting for replacement

1. WE6 Electro-hydraulic control WH hydraulic operated
2. Spool return by hydraulic or spring in main valve

1. DBDS cartridge valve main adjustment relief
2. Supplate Mounting pattern G304/1
3. Directive 97/23/EC With CE Certificated

1. Screw-in DBDS cartridge valve inserted
2. Supplate Mounting pattern G302/1
3. Pressure adjustable with seven pressure stages

1. Pressure adjustable with screw-In cartridge type
2. High-carbon alloy spring not deformed
3. Heat hardening for key parts

1. Comfortable spring adjustment with hexagon bolt
2. High elasticity of protective cap
3. Good black galvanization for rust prevention

1.Controlling flow in actuator lines
2. Obtain required speed of the actuator in both directions
3. Sandwich plate standard of ISO, NFPA, ANSI

1. Hand level operated of control the spool/ poppet position
2. With or without throttle insert option
3. With spring return or detent indicated

1. Reduce hydraulic shock in the main system
2. Subplate connections, ISO standard
3. Two different cracking pressures

1. Standard design for mounting
2. Sandwich assembly, easily replacement
3. Three service ports, option

1. Piston non return sealing
2. No inner leakage with good quality
3. Eight service oil ports available

1. One leak free closure in one direction
2. For in-line or manifold assembly
3. Two cracking pressures available