Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Model NO.: OVWD62(6, 8, 7)1X
Connection Type: Welding
Valve Body:Forge Welding
Driving Mode:Pneumatic
Material of Seal Surface: Soft Sealed

Sanitary butterfly valve/butterfly valve/valve
Size:usually 1"-4",any size is demandable
Material:SS304/SS316

Motorized Actuated Double Union PVC Ball Valve
On/off, modulating 4-20mA control
Compact or explosion-proof actuator
IP67 weatherproof

It has the capabilities of anti-wear, corrosion-resistant, high-temperature resistant, as well as high hardness, high toughness

1.Materal body:2W:Bross;2S:stainless steel
2.Please contact factory for special voltage and specifcatin
3.Good Quick and cheap price

Nominal diameter: DN40-350mm
Nominal pressure:PN1.0-2.5MPa
Applicable temperature:0-80 Deg.c
Material:cast steel,cast iron
Medium :water

2-pc stainless steel ball valve full port,flange end PN10-40 ISO-direct mountiong pad
2pc Class 150 full Bore Floating Ball Valve (W403)
Class150

handwheel ball valve
cast steel ball valve
floating ball valve
flange ball valve

2PC Ball Valve
Size: 1/4 -4"
Ratting: Class150LB-1500LB
Material: WCB, LCB, CF8, CF8M, CF3, CF3M, A105, LF2, F304, F316, F304L, F316L
Design

1.Design and fabrication per DIN3352part4\
2.Length per GB1221-1989
3.ENds flange size per GB9113.1-2000
4.Inspection and test per GB/T 13927-1992

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Actuator: Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

Pressure Adjusting Range
* 3 kgf/cm2 ~10 kgf/cm2
* 7 kgf/cm2 ~20 kgf/cm2
Applied Temperature
* -15°C~100°C...

2pc inner thread ball valve/2pc stainless steel ball valve
Material: SS201/SS304/SS316
Size:DN6-DN100(1/4"-4")

Model NO.: Q911F
DN: 15-400mm
PN: 1.0, 1.6, 2.5, 4.0, 6.4MPa
Connection Form: Thread
Valve Body Material Available: WCB/Stainless Steel CF8/CF8m

Size DN40-DN600 Medium Temp 25
Preesure 1.6PMA Material Ductile ironEN-GJS-500-7
Brand

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

handwheel ball valve
carbonsteel ball valve
flanged ball valve
mediun pressure ball valve