Valves

High pressure nass coil solenoid valve
1)HIGH PRESSURE,
STAINLESS STEEL BODY
Temperature:-5~130
Pressure:0~100 bar(DN1~3MM), 6~160bar(DN10~25MM)

The side entry trunnion mounted ball valve has been designed two piece body type or three piece body type and with two floating seats

Medium: Water, Air,Oil\Gas
Temperature:-5 to 80 degree
Pressure: 0 to 0.7Mpa Max Pressure:1.05Mpa
Material: Stainless Steel
Model:2S160-15

A42Y-C A42H / Y Spring Loaded Full Lift Safety Valve are used for the equipment and pipeline of the air,petroleum gas, liquid etc.

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

2 way full port ball valves
PN: 210, 420bar
DN:13~50mm
Carbon steel materials
Imported O-ring...

electric control valve sleeve, an adjusting instrument input (4-20mA DC, 0-10mA DC or 1-5V DC) control operation can be a control signal.

High pressure water mini nass coil solenoid valve 1 inch
1)HIGH PRESSURE,
2)STAINLESS STEEL BODY
3)Temperature: -5~130
4)Sealing material: PTFE

Principle of the cast steel floating ball valve: This kind of ball valve has a floating ball supported by two valve seats. Under the medium pressure e

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

PN: 315bar
DN: 6~50mm
Connetion type: manifold mounting
Material:carbon steel
Airproof: NBR, FPM ...

pneumatic shut-off valve driven by the top film structure, equipped with multi-spring actuator.

stainless steel solenoid valve for water,air and so on
1)stainless steel316
2)DN 2 to 5mm
3)2/2 way series
4)direct acting series

The side entry trunnion mounted ball valve has been designed two piece body type or three piece body type and with two floating seats

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Pressure Grade: 500bar
Nominal Diameter: 6,10, 13, 20, 25, 32, 40, 50mm
Thread Connection: BSP, NPT, PT
Material: brass, stainless steel, WCB

-Direct solenoid actuated directional spool valve
high performance version
-Solenoid coil can be rotated through 90 °
-Hand override, optional

It is suitable for control and shut-off applications of common corrosive gases and liquid media.