Valves

Model NO.: Q614(5)F
Connection Form: Thread
Valve Body Material Available: Stainless Steel 304, 304L, 316, 316L
Driving Mode:Pneumatic
Type:Floati

• Meet MSS-SP-80 Standards
• Max. Pressure: 150PSI Steam; 300PSI CWP
• Cracking Pressure .75 To 1PSI
• Temp. Range: -20 To 406 º F

1-PC Stainless Steel Ball Valve,Reduce Port,1000WOG,PN63,CF8M/CF8,SS316/SS304,1.4408/1.4301

Actuator Size: Φ80 Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

3-PC STAINLESS STEEL BALL VALVE WITH CLAMP END,STAINLESS STEEL VALVE,BALL VALVE,CAST STEEL VALVE,FULL PORT BALL VALVE,VALVE FOR WATER OR OIL OR STEAM

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

electric control valve sleeve, an adjusting instrument input (4-20mA DC, 0-10mA DC or 1-5V DC) control operation can be a control signal.

1) TWO WAY POSITION solenoid valve
2) direct acting
3) max pressure is 2.5MPa
4)high pressure valve for water ,air ,hot water

Model NO.: Q641F
DN: 15-400mm
PN: 1.0, 1.6, 2.5, 4.0, 6.4MPa
Connection Form: Flange
Valve Body Material Available: WCB/Stainless Steel CF8/CF8m

y-strainer, strainer valves
material:ss304,ss316,WCB
size:1/2"-4"
end:BSP,NPT,DIN thread

2-pc stainless steel ball valve full Port,1000wog,PN63,150LB/300LB,CF8M/CF8,SS316/SS304,1.4408/1.4301

• We are strong on mass production of excellent processing quality with advanced production technology

1.Pilot diaphragm drive, normally closed.
2.Valve body material is SS316.
3.Can be operated directly without pressure.

3-PC SOCKET WELD STAINLESS STEEL BALL VALVE ,STAINLESS STEEL BALL VALVE,2 PC VALVE,VALVE FOR WATER,OIL,STEAM O,SOME CORROSIVE LIQUID

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

pneumatic shut-off valve driven by the top film structure, equipped with multi-spring actuator.

Model NO.: D97(4)3H
Connection Form: Wafer/Flange
Material: WCB, Stainless Steel
Driving Mode:Electrical
Seal Material Available: EPDM, PTFE, H/Y

auto-control solenoid valve
1)body material: brass and stainless steel
2)three way magnetic valve
IP65 water air oil G1/4" auto-control solenoid v