Valves

1.Materials:aluminum,plastic
2.Different V:DC12V,DC24V,AC24V,AC110,AC220,AC380
3. One by one 100% tested

Hand-Switching valve is a manual three-position and four way valve with hard seal or soft seal structure. It can control airflow direction, and d

air controlled pulse jet valve ,size:1" ,orifice:25mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :35

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

The accessory control valve are not usually used in the unit pneumatic system, mainly work with other directional valve.

we are the professional pneumatic solenoid valve manufacturers. single electric, double electric

1.Materials:aluminum alloy and NBR
2.Different Volt :DC12V,DC24V,AC24V,AC110,AC220,AC380
3.100% one by one tested

Product Description :
CT-466 without gauge
CT-466G with gauge
Model:3/2 and 5/2
Size:1/8 to 1/2...

pulse jet valve ,DD type,orifice:25mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

1.color according customer's requirtment
2.100% tested
3.The original factory service
4.Good quality and cheap price

Right Angle Pulse solenoid valves-DMF-Z-40S,DMF-Z-50S

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

1.Material of body: Aluminum alloy
2.Color according to customer's requirements
3.100% Testing
4:good quality and cheap price

pulse jet valve ,size:2-1/2" ,orifice:62mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

1.To be installed in moving devices like Pneumatic Cylilnder, slide, and so on.
2.Total 8 operating styles
3.Panel bore size: 30mm or 25mm

1) Size: 06: G1/8,08:G1/4,
2) Two (Three) postion five way
3) Similar to AIRTAC type
4) one by one 100% testing
5) good quality and low price

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification..