Valves

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

1.Three-Piece Construction
2.Lowest Pressure Drop
3.Type K Copper Tube Ends
4.Dual Gage Ports Included
5.Oxygen Cleaned...

Voltage: DC12V,DC24V,AC110V,AC220V,AC380V
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C (179.6°F) Viton Seals: -29°C (-20.2°F) to 232°C

1.Solenoid coil for 4V series solenoid valve,etc...
2.Insulantion class: B,F
3.different volt: AC220V,AC110V,DC24V,DC12V
4.100% tested

1. Ordering Code: CA-20T AC220V
2. Voltage: DC24 and AC220V, can be customized
3. Possible to choose imported diaphragm
4. Made in China

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001

pulse jet valve ,size:2" ,orifice:45mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

1.Two-Piece Construction
2.Lowest Pressure Drop
3.Type K Copper Tube Ends
4.Dual Gage Ports Included
5.Oxygen Cleaned...

pneumatic shut-off valve with soft seal structure, design work and repair seal seal small operating torque, sealing pressure than moderate,

Diaphragm Seat: PA-6 (standard), Viton coated mild steel
Intergral Pilot and Remote Pilot type
Pressure Range: 30(5)-860(125) kPA(Psi)

1. Order code:CA-62MM
2. Guarantee: 1 million times, 1 year
3. Working temperature: NBR: -40℃-82℃, Viton:-29℃ - 232℃
4. Made in China

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

pulse jet valve ,size:1" ,orifice:76mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

valve is installed the pipeline must not have reverse pressure differential required power for several times emperature before officially put into use

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

Diaphragm kits:K4502 K4503 K4522
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F)

1.Two-Piece Construction
2.Lowest Pressure Drop
3.Type K Copper Tube Ends
4.Dual Gage Ports Included
5.Oxygen Cleaned...

small sleeve valve accept direct current signal conditioning instrument to change, by adjusting the media flow.

solenoid valve base is mainly used to connect the solenoid valves. Using it, it can control a certain pneumatic devices at same time.