Valves

solenoid valve base is mainly used to connect the solenoid valves. Using it, it can control a certain pneumatic devices at same time.

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

air controlled pulse jet valve ,size:1" ,orifice:25mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :35

Diaphragm Kits:K10200, K10201
Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
25% increase in flow over the industry leading 76MM valve

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001 procedures to meet

pulse jet valve ,size:2-1/2" ,orifice:62mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

ASCO 8320 series 3/2 direct acting general service solenoid valves brass or stainless steel body 1/4NPT

Professional manufacturer of solenoid coil

high pressure angle pressure regulating valve adopts lens type valve structure, the valve seat is easy to replace, good sealing performance.

we are the professional pneumatic solenoid valve manufacturers. single electric, double electric

air controlled pulse jet valve ,size:1-1/2" ,orifice:45mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :50

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

bellows seal single seat control valve is a top guide structure regulating valve, the valve has the advantages of compact structure.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.