Valves

Body Materials: Carbon steel, Stainless steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic ac

The valev seal function is:A:the oil inlet closed port's pressure is zero.B:the oil inlet closed port's pressure is below than the other two

1. BKH-SAEFS flange ball valves;
2. SAE code 61, 62;
3. working pressure 3000psi and 6000psi;
4. Zero leakage, 100% tested

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures

IGP-2 Series internal gear pump
Type:Hydraulic Power Units
continuons working pressure:310.5 Mpa
oil viscosity:20~40cst

Body Materials: Carbon Steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

China KHB Stainless Steel Ball Valve For Natural Gas manufacturer,supply KHB
Stainless Steel Ball Valve For Natural Gas to your requirements

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

1. check valve;
2. poppet type, steel;
3. pressure up to 500bar;
4. burst pressure 0.5bar;

Explosion isolation proportional cartridge throttle valve
specification 25 32 40 50
working pressure(Mpa) 7 16 25 31.5
maxi. flow(l/min) 1000

Body Materials: Forged Steel A105
Trim: A105+ENP, 13Cr, F304, F316
Seat:PTFE
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic

High Pressure Ball Valves:in carbon steel and S.S. material and are supplied with crankedsteel handles. work up to maximum standard pressure 500 Bar

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

1. VH3V 3 way 2 position ball valve;
2. up to 500bar;
3. mountable body;
4. Zero lakage, 100% testd

Explosion isolation proportional cartridge relief valve
specification:25 32 40 50
working pressure(Mpa) 7 16 25 31.5
maximum flow(l/min) 400 750

Size: 2" ~ 24"(DN50 ~ DN600)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

2 Way High Pressure Ball Valves:in carbon steel and S.S. material and are supplied with crankedsteel handles. work up to maximumpressure 500bar

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection