Valves

Size: 2" ~ 24"(DN50 ~ DN600)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

Brass ball valve/ball valves/brass valves/full bore ball valve
Norminal Pressure:2.5MPa.
Working Medium:Water,Non-Causticity Liquid...

plastic flow limit solenoid valve for RO system.
flow limit solenoid valve with 1/4"NPT female thread inlet/out port.
CE certified solenoid valve.

American type globe valve
Material:ss304/ss316/WCB
size:1/2"-2"
End:BSP,NPT,DIN thread
Pressure:200PSI

1. Design and Manufacture Conform to BS5163
2. Flange dimensions Conform to BS4504 PN16& EN1092
3. Face to Face dimensions Conform to BS5163 PN1

1) Two (Three) postion five way
2)Similar to AIRTAC type
3) other type:4A100,4A200,4A300
4) good quality and low price
5) 100% one by one testing

Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C (179.6°F) Viton Seals: -29°C (-20.2°F) to 232°C

2-piece body, FIP x FIP Gas Ball Valve
aluminum lever handle
Temperature:-40C to 51.5C(-40F to 125F)
CSA1/2;5psig & UL250psi Approved

1.3-Way Brass Ball Valve
2.Brass Compression Ball Valve with Lever Handle
3Brass Ball Valve with Compression Ring
4.600psi Brass Shut off Valve

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal

Size: 2" ~ 24"(DN50 ~ DN600)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

size: NPs 2″~ 64″, 50 ~ 1,600mm
Design standards: ANsI B16.34, Mss sP-81
Inspection and test standards: API 598
Face-to-face: Mss sP-81

1. Simple structure
2. Low cost and economic shut-off valve
3. Only a 3/2 way solenoid valve is requested to control the pinch valve

Brass radiator valves/thermostat valves.radiator fittings.
Norminal Pressure:1.6MPa.
Working Medium:Water,Saturated Steam.

flanged ball valve/ball valve
Material: SS304/316
Size:DN6-DN100(1/2"-10")

1. Flange dimensions Conform to ANSI B16.1 (1251b)
2.The mesh of wire screen or the hole dimension of the perforated screen can be as per the cust

water filter solenoid valve with 1/4"NPT male thread inlet/outlet port.
solenoid valve for water filter.
CE certified water filter solenoid valve.

Diaphragm kits:K2501 K2503
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F)

EN331 Approved MOP5-20,M/F Full Port Ball Valve With Self-Lockable Steel Handle
Forged brass body chrome plated ball with brass stem.
Double O-rings

1.3PCS Brass Ball Valve Solder End
2.3 PCS Full Port Brass Ball Valve Solder End
33 PCS Forged Brass Ball Valve Solder End
4.600psi Brass Shut of