Valves

Diaphragm Kits:K10200, K10201
Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
25% increase in flow over the industry leading 76MM valve

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001 procedures to meet

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Double Acting Single Acting Pneumatic Flanged Ball Valve

high pressure angle pressure regulating valve adopts lens type valve structure, the valve seat is easy to replace, good sealing performance.

we are the professional pneumatic solenoid valve manufacturers. single electric, double electric

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

bellows seal single seat control valve is a top guide structure regulating valve, the valve has the advantages of compact structure.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

pneumatic angle valve control valve spool is rectangular in shape, not only guide structure, the valve flow path is simple, easy cleaning.

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification..

Series unbalanced labyrinth control valve adopts the labyrinth cage and unbalanced trim design.

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

multi-hole low noise control valve adopts the sleeve guided structure and pressure balanced plug.

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design