Valves

IGP-3 Series internal gear pump
Type:Hydraulic Power Units
continuons working pressure:31.5 Mpa
oil viscosity:20~40cst

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Connection Type:B-Plate way NL-Femal thread WL-Male thread
F-(Activity)round falnge way F1-Welded flange-type

The pressure relief valves (DB) consist mainly of the main valve (1) with main spool assembly (3) and pilot operated valve (2) with pressure.....

1. stroke control valve;
2. 1st position free flow, 2nd position one way flow;
3. BSP or LR (DIN 2353 light series)
4. up to 400bar

FW electrical operated directional control valve
model: 01 02 03
maximum pressure(Mpa) 31.5
maximum flow(l/min):14 35 63

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Valve body and connector Material:Carbon steel
Ball andcontrol the body of mandrel material:alloy steel
Ball Seal material:POM

The pressure relief valves (DB) consist mainly of the main valve (1) with main spool assembly (3) and pilot operated valve (2) with pressure.....

1. foot valve for hydraulic breaker;
2. direct mount, easy, reliable;
3. convert a excavator to rock/concrete breaker;
4. minor leakage

IGP-1 Series internal gear pump
Type:Hydraulic Power Units
continuons working pressure:310.5 Mpa
oil viscosity:20~40cst

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

The valev seal function is:A:the oil inlet closed port's pressure is zero.B:the oil inlet closed port's pressure is below than the other two

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures

IGP-2 Series internal gear pump
Type:Hydraulic Power Units
continuons working pressure:310.5 Mpa
oil viscosity:20~40cst

1. hydraulic one way valve;
2. poppet type, heat trated steel;
3. pressure up to 500bar;
4. burst pressure 0.5bar;

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

China KHB Stainless Steel Ball Valve For Natural Gas manufacturer,supply KHB
Stainless Steel Ball Valve For Natural Gas to your requirements

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

Explosion isolation proportional cartridge throttle valve
specification 25 32 40 50
working pressure(Mpa) 7 16 25 31.5
maxi. flow(l/min) 1000