Valves

THINKTANK focused on manufacturing control valve, shut off valve, butterfly valve, knife gate valve, ball valve, globe control valve,

China KHB Stainless Steel Ball Valve For Natural Gas manufacturer,supply KHB
Stainless Steel Ball Valve For Natural Gas to your requirements

These safety value are used as Extra Pressure Protection Device for the equipment and pipeline of the steam, ect. The working temperature with Carbon

Design for Rexroth type directional hydraulic valves.
Standard:VDE0580
Normal Voltage:12/24v;110/220v
IP Class:IP65(IP67or IP69 are also available)

For occasions
1 IC card water meter, heat meter.air conditioning humidification,air-warm valve.
2 Air-conditioning fan coil, fire sprinkler.
3 Sol

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

2/2 way diaphragm,normally open solenoid valve.
stainless steel solenoid valve.
fluid media: air, water, oil, gas.
solenoid valve with CE approval.

1. Pressure: 3000/6000psi
2. Male thread or Female thread
3. Port size:1/4",1/2", 3/4",1"
4. Material: SS304, SS316, brass

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

PN: 315bar
DN: 6~50mm
Connetion type: manifold mounting
Material:carbon steel
Airproof: NBR, FPM...

2 way water valve normally close stainless steel SS304 2 inch VITON NPT BSP thread
2.5-50mm orifice;
2 way;
NBR ,VITON;
ss304.

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

Stainless Steel 2PC DIN3202-M3 Ball Valve
DN: 6-100mm, Full Port
Material:SUS304/316
Pressure:1000PSI / PN64
Medium:water,oil,gas...

electric damper electric butterfly valve electric ball valve Dn50-DN2000mm PN 1.6Mpa 4.0Mpa 6.4Mpa o.5Mpa Material: at buyer's option

Pneumatic Female Thread 3-pcs Ball Valve, for General Chemical and Industrial ServicesInvestment cast body and end cap End type: threaded BSP or NPT

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

3-PC SOCKET BUTT WELD STAINLESS STEEL BALL VALVE ,STAINLESS STEEL BALL VALVE,2 PC VALVE,VALVE FOR WATER,OIL,STEAM O,SOME CORROSIVE LIQUID

Stainless Steel Y Type Check Valve
Design Standard: ANSI B 16.34
Testing Standard: API598
For general chemical and industrial service

1pc inner thread ball valve
Material: 304/316
Size:DN6-DN100
Applicable media: water ,oil, gas

1),Size:1/4"-------4"
2),Material:WCB,304,316(CF8,CF8M)
3),3pc ball valve,stainless steel ball valve,thread ball valve,three piece ball valve