Valves

Model NO.: D97(4)3H
Connection Form: Wafer/Flange
Material: WCB, Stainless Steel
Driving Mode:Electrical
Seal Material Available: EPDM, PTFE, H/Y

VF 5220 SMC type 5 way air pneuamtic solenoid valve

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

one way valve, check valve, non return valve, no leakage valve, mini valve, plastic check valve

Flanged Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Actuator

Body: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS...

Professional manufacturer of solenoid coil

Specifications
1. Material: Aluminum Alloy
2. Nominal Diameter: 3 "
3. Pressure: 0.3Mpa
4. Open mode: Pneumatic

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

one way valve, check valve, non return valve, no leakage valve, mini valve,plastic check valve

1. Simple structure
2. Low cost and economic shut-off valve
3. Suitale for food applications

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

Tri-Clamp Ends Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Act

Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C (179.6°F) Viton Seals: -29°C (-20.2°F) to 232°C

Professional manufacturer of solenoid coil

Specifications
1. Material: Aluminum Alloy
2. Nominal Diameter: 3 "
3. Pressure: 0.3Mpa
4. Open mode: Pneumatic

lectric pressure regulating valve, a straight stroke electric actuator and low flow resistance through the regulating valve.

1. Simple structure
2. Low cost and economic shut-off valve
3. Suitale for food applications

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.