Valves

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

the valve is called ammonia globe valve .which is used for ammonia cold room pipe . Which control the flow of ammonia by operate the hand wheel .

Kognaei solenoid valve Longer working time,High flow,Popular with the masses of customers

pulse jet valve ,size:1-1/2" ,orifice:45mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

EN331 Approved MOP5-20,F/F Full Port Ball Valve With Steel Lever Handle
Forged brass body chrome plated ball with brass Stem;
Double O-rings

• Threaded, 2-Piece, Brass Gas Ball Valve, 600 WOG,
• Sizes: 3/8" to 1"
• Approvals: CSA

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

1.3 pieces ball-type
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

1,High quality,long life cycle
2.One by one 100% testing
3.Color according to customer's requirements
4. good quality and low price

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Size: 2" ~ 14" (DN50 ~ DN350)
Rating: ANSI 150lb ~ 900lb(PN16~64)
Body Materials: Carbon Steel
Plug: Carbon Steel
Seat: PTFE

220VAC Dust Collector Valves
1. Ordering Code: CA-62T
2. Voltage: DC24 and AC220V, can be customized
3. High temprature valve can be customized

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

The valve which is called service valve/ semi-hermetic valve ,which is used for bitzer semi-hermetic compressor .The fnction is suction &discharge

pulse jet valve ,DD type,orifice:50mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

1.3 pieces ball-type
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

4HV series Hand-switching valve using the handle rotation directional valve,
the valve function subdivided 3 position 4 way or 2 position 4 way

• CSA Certified - 5 PSI for Indoor Shutoff Per CGA91-002& ASME B16.44
• 600 PSI WOG Rated
• Threaded ends comply with ANSI B1.20.1

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below