Valves

DKJ SKJ ZKJ series quarter -turn electric actuator (90 degree rotary 100-10000Nm). It can be widely used in electron, metallurgy, oil, chemistry.

1. Valve flow channel using a special structural design, less internal impedance
2. Standard installation pattern for interchangeable to other brand

Pneumatic Actuator with Mechanical Spring (AV)
Single acting pneumatic actuator provided with a mechanical spring to close or open the valve.

Directional control valves with removable coil
type:rexroth type
Pressure:High Pressure
Temperature of Media:Normal Temperature

Features:
- Direct actuated directional spool valve with hand lever
- With spring return or detent, optional
- For subplate mounting

Foxboro and Eckardt are most well known as a high quality instrumentation suppliers. Positioners, Pressure-, Absolute Pressure- and Differential Press

1. Pressure testing and inspection equipment 100% inspection to ensure high and stable quality
2. Easily installation design

Pneumatic Actuator with Pneumatic Positioner (AN)
The standard pneumatic positioners in the FENGCHI valves are YTC positioners.

proportional electro-hydraulic control P-Q valve
1.Maximum pressure: 31.5 MPa
2.medium: oil
3.control: hydraulic
4.Maximum flow:250L/min(DN25

Features:
- Direct actuated directional spool valve with hand lever
- With spring return or detent, optional
- For subplate mounting

1. Combination proportional and inlet throttle valves
2. With high quality proportional solenoid coils controlling precisely pressure and flow

Customized Steel Directional Multiple Hydraulic Valves Nonstandard
model:01 02 03
maximum pressure(Mpa) 31.5
maximum flow(l/min) 14 35 63

Features:
- Direct actuated directional spool valve with hand lever
- With spring return or detent, optional
- For subplate mounting

1. Saving energy and offer min. pressure and flow as required
2. Keeping the pump in lowest pressure difference as per loading

AJ type accumulator control valve group
1.Nominal diameter:20,25,32,40 mm
2.Pressure regulating range: 6.3;16;25;31.5MPa

Features:
- Direct actuated directional spool valve with hand lever
- With spring return or detent, optional
- For subplate mounting

1. Sleeve with hexagon and protective cap or rotary knob option
2. Normally closed/open for A or B type
3. Installation for manifolds

NG10 Cetop 5 Series Standard Manifold Block (A05P/D05P/A05S/D05S)
Model NO.: A05P/D05P/A05S/D05S
working pressure:35MPa

.Low internal leakages
.High strength cast iron body
.Nickel plated spools

1. High strength of casting iron as valve housing
2. Hand wheel with adjustment element
3. Five pressure stages option