Valves

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per
TXPC Solenoid Valves

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

solenoid valve base is mainly used to connect the solenoid valves. Using it, it can control a certain pneumatic devices at same time.

SMC V2A
Working medium : air,water,steam
Motion Pattern : Direct Drive
Type : Normal Close Type

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001 procedures to meet

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Direct Drive Valve
Alloy Body Valve
F Class Insulation

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

we are the professional pneumatic solenoid valve manufacturers. single electric, double electric

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification..

3V: 3 Way
4V: 5 Way
Pneumatic Control Valve
Air Valves