Valves

Model NO.: D97(4)3H
Connection Form: Wafer/Flange
Material: WCB, Stainless Steel
Driving Mode:Electrical
Seal Material Available: EPDM, PTFE, H/Y

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Welded Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Actuator

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

pneumatic thin fat through engine valve dual oriented structure, equipped with multi spring actuator. Has the advantages of compact structure.

1. Simple structure
2. Low cost and economic shut-off valve
3. Suitale for food applications

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

Actuator Size: Φ50Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

3PC Threaded ball valve
1). Size: 1/4",3/8",1/2",3/4",1",1-1/4",1-1/2",2",2-1/2",3",4"

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

Actuator Size: Φ80 Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

lectric pressure regulating valve, a straight stroke electric actuator and low flow resistance through the regulating valve.

1.Pilot diaphragm drive, normally closed.
2.Valve body material is SS316.
3.Can be operated directly without pressure.

Double Acting Single Acting Pneumatic Flanged Ball Valve

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures

Actuator Size: Φ50Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

single seat control valve is a top guide structure regulating valve, the valve fluid channel was streamlined S, the pressure drop, flow is large.

Body: SS316 CF8M
Coil :Special Copper Wire (H)
Core :Stainless Steel
Tube :Stainless Steel

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Body: SS316
Coil :Special Copper Wire (H)
Spring: Stainless Steel
Plug: NBR.Viton .Silicon, PTFE