Valves

Model NO.: Q947F
DN: 15-400mm
PN: 1.0, 1.6, 2.5, 4.0, 6.4MPa
Connection Form: Flange
Valve Body Material Available: WCB/Stainless Steel CF8/CF8m/C

Aluminum valve body
1.Material:aluminum alloy
2.weight:5KG,biggest can do 1.2x1.2m
3.Low pressure casting
4.No leaking and no casting defect

Model:(2 Position 5 Port Single Control)
4V110-M5
4V110-06
4V210-06
4V210-08...

4A series air control valve have 5/2 type and 5/3 type, about the 5/3 air control valve, there are 3 types: center close, center press,center exhaust.

1. FV420 two position four way
2. one by one 100% tested
3. good quality and cheap price

Pressure Vacuum Vent Valve
1. Material: Aluminum
2. Size: 2"
3. Pressure: 500-900pa
4. Vacuum: 1500-2250pa...

Kognaei solenoid valve Longer working time,High flow,Popular with the masses of customers

pulse jet valve ,size:1-1/2" ,orifice:45mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

NAMUR valves(4V series) are widely used for pneumatic actuators,high quality,cost and space saving are characteristics of MECHIN NAMUR valves

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Model NO.: Q61(6, 8, 2)1F
Connection Form: Female/Male Thread, Flange, Welding, Hoop
Valve Body Material Available: Stainless Steel 304, 304L, 316,

Product description
(1)Action is sensitive,start-up pressure low
(2)A little bit dustproof
(3)Coil:high-end coil

Gas pressure reducer (HF309) is made of alloy. We are a professioanl manufacture specilized in producing gas regulators.

1.Air tank pressure regulator
2.SMC type air regulator
3.100% tested
4.good quality and low price

air controlled pulse jet valve ,size:1" ,orifice:25mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :G1

The accessory control valve are not usually used in the unit pneumatic system, mainly work with other directional valve.

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

koganei 380-4E2-pll have Large flow, large body, low power, long life