Valves

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Lpg regulator valve (HI603B) is made of alloy, zinc and copper. As clients' requirements, we can do OEM.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal

Electonic drain valve
Port Size:1/4''-1/2'' Female Thread
With OPT Electric Timer

110-4E2-PLL-DC24V

1.Service life: 10,000,000
2.Different V:24V,110V,220V,380V
3.100% Testing
4.Good quality and cheap cheap

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Electonic drain valve
Port Size:1/4''-1/2'' Female Thread
With OPT Electric Timer

A180-4E1-PLL-DC24V

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

1. Volt: 12V,24V, 110V, 220V
2.Color :silvery or black
3. One by one 100% Tested

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per

A180-4E2-PLL-DC24V

1.Materal body:alloy
2.Please contact factory for special voltage and specifcatin
3 good quality and cheap price

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per
TXPC Solenoid Valves

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.