Valves

ball valve with steel handle,three way ball valve with chrome plated,Brass ball valve,water valve,plumbing valve,valve for pipe

YIDAY DN20 3/4'' 2 way Brass Electric Ball Valve 9-24V AC/DC and CR01 2 Wire NPT or BSP Thread Ball Valve

• Threaded Two-Pieces Body - Full Port ,600 WOG
• NSF/ANSI 61-8
• Sizes: 1/2" to 1" (DN 15 to DN 25)
• Conforms to MSS SP-110

Brass radiator valves,radiator valve,heating valve
Norminal Pressure:1.6MPa
Working Medium:Water,Saturated Steam.
Working Temperature:-10℃-120

Small size and easy assembly.
Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% ,DC Voltage tolerance:±1%.

.type: steam valve
.Please contact factory for special voltage and specifcatin
.Good quality and low price
. one by one testing

Nomical Pressure:2.0MPa Working Medium:Water,Non-Corrosive liquid,air(Maximum working pressure is 0.6MPa) Working Temperature:-20℃≤t≤110℃

Material: Forged Brass, CW617N, CW614N,C37700
Size: 1/2''-4'' Normal Pressue: PN25
Handle: Steel /Aluminum Handle
Medium: Water, Gas, Oil

1.3PCS Brass Ball Valve Solder End
2.3 PCS Full Port Brass Ball Valve Solder End
33 PCS Forged Brass Ball Valve Solder End

1.brass spring check valve
2.perfect seal,no peeling,no burr
3.both INCHS and AMETEK
4.Surface polished,smooth and clean.

Marine Bronze Angle Valve F7302 5K15-65
F7304 16K15-65
Advantages: high quality, competitive

brass low power valve
a:General Service for Air/Inert Gas, Water, Lt. Oil service at moderate temperatures.
b:either AC or DC
c;pilot operated

stop valve, plumbing valve, water valve, hydraulic valve, bronze stop valve, stop cock, globe valve,brass compression stop valve,compression valve

1/2" ~ 4" Horizontal Manual Brass Bi-directional Hard Seal Ball Valve (ZH1303)
1) Size: 1/2" ~ 4"
2) Environment Temperature: -20~ +120℃

ISO/OEM/OD CERTIFICATION
ZERO PRESSURE LONG LIFE
COULD DESIGN AND PRODUCE AS YOUR REQUIREMENTS
GOOD QUALITY AND REASONABLE PRICE

1.Direct-Acting, conductive, normally closed.
2.Valve body material is forged brass.
3.Can be operated directly without pressure.

• Lead Free * Brass, DZR
• Two-Piece, Full Port, C x C, with Drain, 600 PSI WOG
• Approvals: cUPC, NSF 61,NSF 372
• Size: 1/2" to 1"

Nomical Pressure:1.6MPa
Working Medium:Water,Non-Corrosive liquid,air(Maximum working pressure is 0.6MPa)
Working Temperature:-20℃≤t≤120℃

1.3PCS Brass Ball Valve Solder End
2.3 PCS Full Port Brass Ball Valve Solder End
33 PCS Forged Brass Ball Valve Solder End
4.600psi Brass Shut of

Brass gate valves/gate valves,brass valves.forging,
Norminal Pressure:1.6MPa
Working Medium:Water,Non-Causticity Liquid,Saturated Steam(≤0.6MPa)