Valves

Brass Pneumatic Mini Ball Valve.
Size:1/4",3/8",1/2",3/4",1"

Pneumatic foot operated valve plastic pump with lock and cover 4F210-08 1/4" BSP NPT
plastic;
5 way;
lock.

12v 110 v 2 way mini solenoid valve fuel oil
female thread;
male thread;
brass;
oil.

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

1.Standard voltage : 24VDC,110VAC, 220VAC
2.Valve body material is brass.
3.Can be operated directly without pressure.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

pulse jet valve ,size:2-1/2" ,orifice:62mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

air controlled pulse jet valve ,size:1-1/2" ,orifice:45mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :50

Connection Form: Single Flange/Double Flange
Size: 4"-16"
Valve Body Material: High Pressure Cast Aluminum Alloy
Butterfly Plate Material: Polymeri

1.Effective Sectional Area: 7.5mm2 21mm2 40mm2 60mm2 110mm2 90mm2
2.Port Size: G1/8" G1/4" G3/8" G1/2" G3/4" G1"
3.Working Medium: Air

1.Working Medium: Compresses Air
2.Port Size: G1/8''
3.Working pressure Range: 0-1.0Mpa
4.Operating Temperature Range: 0-600C

1. Pressure 6000psi
2. Material:SS304,SS316, brass
3. Port size:1/8", 1/4",1/2", 3/4",1"
4. Male thread or Female thread
5. Thread: NPT, G, UNF

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

NAMUR valves(4V series) are widely used for pneumatic actuators,high quality,cost and space saving are characteristics of MECHIN NAMUR valves

MECHIN Tiger Valve,adopt FESTO tiger classic solenoid valve technology,sleeve structure,NASS coil and armatures to guarantee tiger valve high quality

solenoid valve is the interface between electronic controllers and pneumatic systems.