Valves

3 way solenoid valve 220v
3 way pilot valve
3 way spring return valve
3 way air solenoid valve
220v air solenoid valve

QFZ Safety Valve set for Accumulator, which consists of stopping valve with high-pressure ball core, direct overflow valve and a mini stopping valve

1. Ordering Code: CA-62MM
2. Diaphragm Kits:K5004, K5000
3. Temperature Range: Minus40 to 82 degree (Nitrile seal)
4. CA type MM series 2.5" valve

2 way direct acting liquid mini aluminum alloy solenoid valve manifold 4pcs for Medical 1/4 1/8 BSP plug
normally close;
Aluminum;
brass.

1) Size: 06: G1/8,08:G1/4,
2) Two (Three) postion five way
3) Similar to AIRTAC type
4) one by one 100% testing
5) good quality and low price

Solenoid valve piping should be thoroughly cleaned before installation. Pass into the media should be free of impurities. Valve pre-installed filter

1.Position and Way NO. :Two-position three-way
2.Lubricate: Not Necessary
3.Working-Pressure: 0.15~0.8MPa
4.Max.Pressure Resistance: 1.2MPa

Hand lever valve are change can be operated by hand. It has three kinds of two position and three way and two position and five way and three positio

Model:4A Air Control Valve
Ways:5/2 \3/5
Size:1/4" 1/8 3/8 M5
Medium:Clean air
Working Pressure:0.15~0.8Mpa Max Pressure:1.2Mpa

1. JM Mechanical Valve,Pneumatic mechanical valve
2. Good quality, fast delivery
3. Competitive price.
4.Material:Aluminum
5.Pressure:0.15 o0.8Mpa

Applicable for on-off change of water,liquid,gas,agricultural water,dilution pesticide,liquid fertilizer etc
PLASTIC SOLENOID VALVE

Characteristics:
1.it has manual switch, it could manual operate valve switch under immediately state
2.The valve has filtrate

KOGANEI type 110 single solenoid series solenoid valves which achieve high reliable,powerful and low current basic performance in a compact,thin body

4V series solenoid valves have 5/2 and 5/3 types, size from M5 to 1/2'',while 5/2 typs have single solenoid type and double solenoid type

1. Equipped with Rexroth DBDS cartridge valve series
2. With 6 presetting pressures available
3. Most qualified selected

1. Hydraulic bar manifolds normal / high flow valves
2. All burrs are clean up before surface treatment
3. Special design for different units

1. Cetop5 (Size 10) bar manifolds for industrial hydraulic valves
2. Aluminum and ductile iron option
3. SAE, NPT, and BSPP porting

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

Port Size: 1/2"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar