Valves

5 Port 2 position pneumatic air flow control hand pull valve Manual valve
4H210-08;
5 port;
0~0.8Mpa.

2 way magnetic solenoid valve water normally open 12vdc stainless steel
2.5-50mm orifice;
2 way;
NBR ,VITON;
ss304.

HV series Pneumatic hand switching valve 4 way manual valve BSP thread 1/4" 3/8" 1/2"
Aluminum Alloy;
plastic;
NBR.

Directly acting small air stainless steel solenoid valve SS304 low pressure for gas
ss;
two way;
10bar;
gas.

magnetic valve normally open close brass stainless steel solenoid valve
2.5-50mm orifice;
2 way;
NBR ,VITON

Normally open water solenoid valve supplier 220v 110v 24v 12v
2.5-50mm orifice;
2 way;
NBR ,VITON

Green Butterfly valves, A type Butterfly Valve, LT type Butterfly Valve
Design Feature
Optional multi-pressure stage
Special design will not cause

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

Balancing valve is a has the special function of the valve, with good flow characteristics and to assign flow, realize the quantitative flow.

1. Pressure: 3000/6000psi
2. Male thread or Female thread
3. Port size:1/4",1/2", 3/4",1"
4. Material: SS304, SS316, brass

1. Pressure: 3000/6000psi
2. Male thread or Female thread
3. Port size:1/4",1/2", 3/4",1"
4. Material: SS304, SS316, brass

Size: 2" ~ 36" (DN50 ~ DN900)
Rating: ANSI 150lb ~ 600lb
Body Materials: Carbon Steel
Disc: Carbon Steel
Seat: 304+graphite

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

miniature solenoid valve, three way magnetic valve ,electromagnetic valve
1)miniature solenoid valve
2)direct acting series
3) normally open and c

400 series solenoid valves 3V/4V have large flow for controlling larger actuators,4V410-15 solenoid valve is widely used on various automation control

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001

CAC45FS010-300
1.5" FS valve with 1/8" RC pilot, nitrile seals and 220/240VAC integral pilot with DIN socket terminals.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

solenoid valve base is mainly used to connect the solenoid valves. Using it, it can control a certain pneumatic devices at same time.