Valves

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

pulse jet valve ,size:2-1/2" ,orifice:62mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

air controlled pulse jet valve ,size:1-1/2" ,orifice:45mm ,NBR or Viton diaphragm , ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,connection :50

our product proportional solenoid valve, 4 way solenoid valve, fuel solenoid valve are produced according to the ISO9001:2000 standards

1) Two (Three) postion five way
2)Similar to AIRTAC type
3) other type:4A100,4A200,4A300
4) good quality and low price
5) 100% one by one testing

Specifications
1.Anti-fire safe design.Anti-static device
2.Free leakage of body Sealed construction
3.Double block&bleed.
4.Extension stem.

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

NAMUR valves(4V series) are widely used for pneumatic actuators,high quality,cost and space saving are characteristics of MECHIN NAMUR valves

solenoid valve is the interface between electronic controllers and pneumatic systems.

we supply pneumatic mechanial valve, include hand pull valve, rotary hand valve, air foot valve and exhaust valve.

The valve which is called Angle safety valve,the function is control pressure safe ,it's used for compressor valve.

1. Ordering Code: SCG353A047
2. Valve type: Diaphragm valve
3. Working pressure: 4-6 Bar
4. Port: 1.5"

The valve which is called Brass Refrigeration Ball Valve,which is used for other machines.

1. Products one by one 100% Tested
2.High Quality Short Lead time
3.Good quality and low price

4M310-08
*Namur style;
*Internally piloted
*100% Testing
*Good quality and cheap price