Valves

1.Thread: BSPT, NPT , BSP.
2.The starndard fluid temperature is 185°C(PTFE).
3.DIN43650A connector Coil is interchangeable

1. Material: SS316
2.In spercial case, SUS series can made 20 Bar, 30 Bar, 40 Bar, please state the fluid preesure range when you order.

1.Orifice: 22mm
2.In spercial case, SUS series can made 20 Bar, 30 Bar, 40 Bar, please state the fluid preesure range when you order.

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

Port Size: 1/2"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

Port Size: 1/2"
3/2 way,single solenoid valve
Housing: Aluminum anodized Pilot flange: plastic (POM)
Wroking Pressure :1-10bar

Body Aluminum
Spring Stainless Steel
Diaphragm TPE(thermoplastic polyester elastomer) or CR(chloroprene)

Aluminum valve body
1.Material:A319;Weight:4.5KG
2.Heat treatment:T5
3.No leaking and casting defect
4.Low pressure casting and leaking test

1)Repair kits diaphragm & spring for maintaining ASCO pulse valve
2)Type:C113827, C113825,C113685,C113686
3)Material: NBR or VITON
4)ISO & CE

1)Code:K2501 K2503 type NBR-Nylon / VITON diaphragm
2)Material: Nylon - NBR or VITON diaphragm
3)Same as Goyen type
4)ISO9001 &CE

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification..

Pneumatic foot operated valve plastic pump with lock and cover 4F210-08 1/4" BSP NPT
plastic;
5 way;
lock.

12v 110 v 2 way mini solenoid valve fuel oil
female thread;
male thread;
brass;
oil.

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

pulse jet valve ,size:2-1/2" ,orifice:62mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,