Valves

JIS F 7306 Marine Cast Iron Angle Valves 5Kg/cm²
JIS F 7306 Marine Valves,5K Cast Iron Angle valves,Angle Valves

horizontal type brass tilting disc check valve /This valve is ideal for hydro, heating and pneumatic plants.Seals in Metal
.Screw in Brass

K34R6-8 series hand rotray valve ,4/3way or 4/2 way can be for your demand.

JIS F 7310 Marine Cast Iron Angle Valves 16Kg/cm²
JIS F 7310 Marine Valves,16K Cast Iron Angle valves,Angle Valves

Brass Spring Check Valve With Filter/ brass body SS 304&316 filter , plastic pin Material: MS58, CW617N, CuZn40Pb2, CZ132 , HOT STAMPING/ FORGING

Brass Spring Check Valve Material: MS58, CW617N, CuZn40Pb2, CZ132 , HOT STAMPING/ FORGING
Disc: Brass Disc silicon rubber seals or ABS disc NBR sea

B62-C83600 Bronze Welded Swing Check Valve1.Pressure:150LB 200LB 300LB
2.Media: sea water,oil,liquefied gas,steam.
3.Temperature: water below 120℃

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...

Female Brass Spring Loaded Check Valve with brass Core/Brass Vertical Check Valve/F X M Brass Spring Check Valve

1.Brass check valve
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...

1.Dn100 Cast Iron Swing Check Valve
2.Pn16 Wafer Type Dual Disc Check Valve
3.Dual Disc Wafer Type Check Valve
4Flanged End Cast Iron Swing Check V

Brass Horizontal Check Valve brass body, brass bonnet, Brass swing, brass nut .
Brass can be CuZn39Pb3, CZ122, C37710,lead free brass C46500, etc

Bronze Y-Type Strainer Valve Material B62-C83600 Bronze Body and Cap PTFE washer
Stainless Steel Strainer net

These are used to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes and

This valve is ideal for all types of plants:
hydraulic, pneumatic and heating plants.
It is suitable to install in horizontal, vertical or oblique

BRASS STRAINER VALVE Stainless steel stainer Theaded F/F ISO228/1 Temperathre:min-15@C max+120@C Nominal pressure:max 16bar Available:in all size

Full Port Check Valves offer some impressive advantages over other types of check valves.

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...