Sensors

AH68 the most suitable for the response of the magnetic field and steep slope changes in magnetic flux density weaker applications.

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

Square Photoelectric Switch | instead of Omron Photoelectric Sensor|Q50 Sensor | Thro-beam Sensor| | Transduser

1. Accuracy @ IPN, TA=+25 oC, ≤±0.4%
2. Non-linearity: better than 0.1%, TA=+25 oC
3. Offset current @ IP=0, TA=+25 oC: not more than ±0.4mA

Description:
Zero power consumption magnetic sensor work not to use the power supply. It can directly will magnetic signal

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

Description:
Product Description
CSH series hall close to switch is based on hall effect principle of making new automation switch

Inductive Proximity Sensor, Capacitive Proximity Sensor-Biduk China
Brand Biduk Mode I1CF,I1CN,C1PF,C1PN
Tpye Inductiv

For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between
the primary circuit (high power) and the sec

AH3601 hall switch circuit is most suitable for response of the magnetic field and steep slope changes in magnetic flux density weaker applications.

1. Hall effect measuring principle
2. Galvanic isolation between primary and secondary circuit
3. Insulated plastic case made of white PPO reco

High Pressure |Inductive Proximity Sensor | Transduser | 500Bar | Biduk

UPS hall sensor
High accuracy Good linearity
Low thermal drift
Good current overload capability
Conform to UL94-V0 standard

AH3661 micro-consumption electronic high sensitivity hall switch circuit mainly used in battery work system and handheld devices.

Rectangular Inductive Proximity Sensor| Rectangular Capacitive Proximity Switch | DC/AC| Biduk China

1. Primary normal current IPN: 50A r.m.s
2. Primary current, measuring range IP: 0~+/-70A
3. Measuring resistance: RMmin

Analog Sensor, Analog Proximity Sensors, Analog Sensing Switch --- Biduk China

For the electronic measurement of currents: AC, DC IMPL.,etc.,with
primary (high power) and the secondary (electronic) circuits.

Bipolar hall effect switch sensor work in unipolar or more to they can.

1.Secondary normal current: 200mA rms
2. Conversion ratio: 1:2000
3. Supply voltage(1±10%): ±12V~±18V
4. Current consum