Stainless Steel Pipes

A511-A511-96:Specification for Seamless Stainless Steel Mechanical Tubing
A554-A554-98e1:Specification for Welded Stainless Steel Mechanical Tubing

1/2" through 4" (larger sizes available upon request)
7 gauge (.180" wall) through 22 gauge (.028" wall) available.
Straight grade 304 and 316

Advantages:
material costs >> no waste, no scrap
transport costs >> smarter logistics
labour costs >> less work needed

Terms:
1)Loading Port::Shanghai/Ningbo or as your requirements.
2)Delivery term:FOB,CFR,CIF ,EXW.
3)Quality assurance:CO,Mill Test Certificate.

TEST CERTIFICATE:
We can provide Stainless Steel Rectangular Tube ASTM A554 Mill Test Certificate as per EN 10204 as per 3.1/3.2 TC

Quality:
Both ends of the pipes are very clean and with no burr
Every pipe is polished two times at least to ensure the pipes are bright enough.

Size:1/8″NB TO 30″NB IN
EFW 304 Pipes & Tubes:6″ NB-100″ NB
ERW 304 Pipes & Tubes:1/2″ NB -24″ NB
304 Pipes & Tubes:1/2″ NB -16″ NB

Outside Diameter x Wall thickness
Inside Diameter x Wall thickness
Outside diameter x Inside diameter
Nominal Wall
Minimum Wall...

Specification: ASTM A554, ASTM A269 Type/ Grade: 304, 304L (18/8), 316, 316L (18/10), Known As 300 Series. Finish/ Polish: Mill Finish,180,320,400#

Mechanical Tubing:
OD's from 1/2" up to 26"
Wall thicknesses from 20ga to over 2"
Welded, Hot Finished Seamless and Drawn Over Mandrel (DOM)

Mechanical Tubing:
OD's from 1/2" up to 26"
Wall thicknesses from 20ga to over 2"
Welded, Hot Finished Seamless and Drawn Over Mandrel (DOM)

Resistant to fouling due to corrosion
Excellent high-end performance in both high and low temperature conditions, to name a few.

Resistant to fouling due to corrosion
Excellent high-end performance in both high and low temperature conditions, to name a few.

Very well suited for use in all types of water;
Excellent resistance to corrosion in all aggressive chemical environments and conditions;

A554 - A554-98e1 - Specification for Welded Stainless Steel Mechanical Tubing.A554 are typically used for stainless steel mechanical tube application

Eddy Current testing is a non-destructive testing method that utilizes an eddy current flow to detect a discontinuity in the weld area of the tubing.

Electric resistance weld tubing (ERW) is a method of tubing production where slit coils of steel are put through a gradual cold forming operation

Hydrostatic Testing:
A pressurized test in which a liquid,normally water,is placed in the pipe or tube at the required pressure to ensure it not leak

Tubing is generally used for structural purposes and the OD is an important and exact number.Tubing size is specified by OD and the wall thickness .

Ornamental Tubing
ASTM: A554
Grades: 304/304L
Sizes: 0.625" - 4.500" Round
Walls: 0.028" - 0.180" Round...