Cranes & Hoists

It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites, and warehouse.

20Cr steel gears, Cold extrusion and heat treatment for toughest pulling demand
4 way roller fairlead
remote control switch

1.Approved by CE.
2.Upper and lower limited switch.
3.Thermal switch supply.
4.Hoist frame option.
5.Copper windings guarantee.

electric wire rope hoist (MD type)
1. lifting capacity: 0.5 t~20 t
2. lifting height: 3 m~60 m
3. working duty: A 3, A 4, A 5

1.cable winch
2.High efficiency, sealed Series Wound Motor
3.Circuit Breaker Protected
4.Rated Line Pull:12000lbs(5443kg)

Lifting Capacity~40t-450t
Span~ 10.5m-31.5m (Non-standard design can be made)
Standard Lift Capacity~ 5T, 10T, 16T/3.2T, 32T/5T, 50T/5T, 75T/10T

Working temperature: -25-+45 degree2. Work moisture: <85% 3. Flammable,explosive and corrosive gas are forbidden in the work environment, there will

1.Approved by CE.
2.Upper and lower limited switch.
3.Thermal switch supply.
4.Hoist frame option.
5.Copper windings guarantee.

Single girder rc overhead crane
1.capacity: 2t
2.span: 3.5m~34.5m
3.lifting height: 3m~30m
4.duty: A3~A5. CE certifica

4wd winch
Rated Line Pull: 5000LB(2268KG) single line
Electric winch with permanent magnetic motor

LD single-girder crane is a kind of small-sized lifting machinery with CD, MD electric hoist as the lifting device and it is widely used in factories

1.Approved by CE.
2.Upper and lower limited switch.
3.Thermal switch supply.
4.Hoist frame option.
5.Copper windings guarantee.

5ton single beam bridge ceiling crane
1.capacity: 2t
2.span: 3.5m~34.5m
3.lifting height: 3m~30m
4.duty: A3~A5. CE certifica

Lifting Capacity~40t-450t
Span~ 10.5m-31.5m (Non-standard design can be made)
Standard Lift Capacity~ 5T, 10T, 16T/3.2T, 32T/5T, 50T/5T, 75T/10T

1.Approved by CE.
2.Upper and lower limited switch.
3.Thermal switch supply.
4.Hoist frame option.
5.Copper windings guarantee.

ATV Winch with permanent magnetic motor;
Rated Line Pull: 2000LB(907KG) single line;
Automatic mechanical brake;

Motor-driven overhead crane
1.capacity: 2t
2.span: 3.5m~34.5m
3.lifting height: 3m~30m
4.duty: A3~A5. CE certifica

IP65 Push Button Crane Pendent Controls, AC400V/DC230V
Remote control, hoist switch, crane switch, crane push button, hoist station

1.Approved by CE.
2.Upper and lower limited switch.
3.Thermal switch supply.
4.Hoist frame option.
5.Copper windings guarantee.

single girder travel overhead crane
1.capacity: 2t
2.span: 3.5m~34.5m
3.lifting height: 3m~30m
4.duty: A3~A5. CE certifica