Auto Repair Equipment & Tools

1. For removing oxygen sensors, injectors, oil pressure sending units and vacuum switches.
2. Accepts either 3/8" or 1/2" square drive ratchet.

1.For Vauxhall/Opel 1.9CDTi single cam/8 valve or twin cam/16 valve .
2.Crankshaft Locking,Camshaft Setting Tools, Tensioner Locking Pin.

1.For Volkswagen Audi Group (VAG) 1.4 and 1.6 FSi Petrol engines.
2.Contains crank TDC positioning, camshaft setting and tensioner lock tools.

1. For VW Polo IV, Skoda Fabia, SEAT Codoba III.
2. Can be used in situ without removing the aluminium housing. Use with a 24mm spanner only.

1.For motorcycles, cars, trucks, tractors, and many other applications.
2.Material: magnesium aluminium with silicon alloy.
3.14 adapters.

1.For silent, ball, hydraulic, rubber bearings, bearing bushes, shaft seals.
2. 20 Press Sleeves,4 step plate discs and 4 Pulling spindles and nuts.

1.Fuel pressure gauge with dual scale,Large,shock protected,easy-reading.
2. For most American,Japanese,European vehicles.

1.Two gauges,Dual scale: 0 - 145psi or 0 - 1000kpa, 0 - 15psi or 0 -100kpa.
2.Check the amount of leakage & helps determine the source.

Essential tools for timing the BMW N47/N57 with doubl camshaft diesel chain drive engines,Kit features crankshaft turning tool to rotate engine to TDC

Suitable for Renault, Vauxhall and Nissan 1.5-1.9-2.2-2.5 DCi.To prevent camshaft, crankshaft from turning belt tensioner when changing a timing belt

Engine Timing Tool Kit for BMW 1, 3 and 5 Series with chain driven engines. Check, adjust and set the Camshaft timing and remove the Cam chain.

1.This five piece set is essential for Ford Focus and C-Max.
2.Petrol Engine 1.6 Ti-VCT (2003-2007).
3. Diesel Engine 2.0 TDCI (2003-2007).

1.For silent, ball, hydraulic, rubber bearings, bearing bushes, shaft seals.
2. 22 Press Sleeves and 5 Pulling spindles and nuts.

1.For silent, ball, hydraulic, rubber bearings, bearing bushes, shaft seals.
2. 20 Press Sleeves,4 step plate discs and 4 Pulling spindles and nuts.

1.Made for use with inner tie rod ends, as well as rack and pinion assemblies.
2.To replace inner tie rods without removing the rack and pinion.

Engine Timing Tool Kit for BMW 1, 3 and 5 Series with chain driven engines. Check, adjust and set the Camshaft timing and remove the Cam chain.

This comprehensive engine timing tool set, enables the correct timing positions to be achieved on both camshaft and crankshaft .

1.This five piece set is essential for Ford Focus and C-Max.
2.Petrol Engine 1.6 Ti-VCT (2003-2007).
3. Diesel Engine 2.0 TDCI (2003-2007).

1. Used for timing 2.2/2.3/3.0 belt and chain drive engines.
2. For Citroen Relay/Jumper, Fiat Ducato,Iveco Daily, Daily/EcoDaily, Peugeot: Boxer.

1.For hard to reach areas.
2.360° rotation for an all round view.
3.Extends to 19-3/4".
4.Designed with pocket clip.
5.Mirror: 1-1/4 inch (dia).