Fiber Optic Equipment

optical power meter is a handheld optical power meter which can be used for absolute optical power measurements, AC adapter supported.

Applications of FBG reflecotor
FTTH,FTTB,FTTC;
Optical network communication
Long-distance line detection

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

DF07A 12-Fiber Wall Mounted Outdoor ODF,working temperature can be -25℃-+60℃,the material is high quality of cold rolled steel.

Gain Flattening Filter is used to compensate for the uneven gain amplification at different DWDM channel by Er-doped fiber amplifier (EDFA)

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

LC/PC Single Mode Fiber Optic Pigtail 0.9mm, with perfect ferrule polishing (3D interferometer can be on request) and low Insertion Loss.

FBG sensors make sense where there is a special challenge that is addressed by one of many inherent advantages of fiber optic sensors.

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

The gel seal closure is weatherproofing system sealing jumper-to-feeder and jumper-to-antenna connectors, which are exposed to outside environment.

we can supply 50,000 FBGS per month, we have highly trained employees and many years experience in fabricating fiber bragg gratings.

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

The Corner Pressurized Polishing Machine CX-20A adapt to four corner pressurized, jig will be installed stable, process most kinds of fiber connectors

FBG integrated with Lensed fiber, mainly used in fiber laser and pump laser,Raysung photonics Inc can supply 15,000 pcs per month.

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

The TFS500 handheld optical fiber fusion splicer exclusively used in the hot splicing of the optical fiber connecting the user end of FTTX projects.

Low insertion loss, high return loss
High stability and reliability
Anti-electromagnetic interference
providing customized reflector

1.Place of Origin:ZheJiang,China(mainland)
2.Sleeves Material:Ceramic
3.Anti-flaming:UL94-V0
4.Heat Distortion Temperature(℃):120

TFS280G Optical Fiber Fusion Splicer is a high quality splicing machine, quick splicing time of typical 9 seconds only. Brand of Jilong production.

we can supply 50,000 FBGS per month, we have highly trained employees and many years experience in fabricating fiber bragg gratings.