Constituents:
1.Lock button
2.On/off seitch
3.abe
4.Wrench
5.Auxiliary Handle
6.Grinding Guard
Operation:
Switch on/off
1. Press the on/off switch forward, hold it in position and press the front of the button down until it locks in position. Then release the on/off switch.
2. For turning off, press and release the on/off switch.
Grinding
1. Grip the grinder securely with two hands so you have control at all times. The starting torque creates a sudden jerk.
2. After starting the tool, apply the grinding wheel to the workplace.
3. Tilt the grinder at a 10° to 15° angle for easy handing and smooth grinding.
4. Apply the grinding disc to the work surface with a light, steady pressure for maximum grinding efficiency. It should never be necessary to force the tool. The weight of the tool applies adequate pressure.
5. The grinding discs are more moderate metal removal on flat or contoured surface. Do not put excessive pressure on the grinding disc. Excessive or sudden pressure will overload the motor, slow the grinding action, put dangerous stress on the disc and causes breakage.
Characteristic:
1. Highly efficient and resilient motor for more power output
2. Electrical surge protection: for a soft start without power overloading
3. Optimized dust protection of the motor and the gearbox
4. Switch: with lock-off / lock-on switch
5. SoftVib handgrip for reduced vibration can be mounted in three positions.
6. Rear shaft handle with soft padding for secure grip
7. Tool-free adjustment of safety guard
8. Spindle lock
