he fish scaler was designed to make the fish scaling process enjoyable. The unit removes the scales from any size fish with out damaging it's skin. It can be used with 100-240volt AC outlet or 12volt DC on your kitchen in family,cafe,hotel, boat, camper etc. This unit will expedite the process of scaling fish with no effort.
SPECIFICATIONS:
1. Rated voltage DC 12 V. The device
2. Engine power 15-30 Tues
3. Cutter speed is 3000 rpm. / Min.
4. Direction of rotation - right!
5. Weight scaler 370
6. Input voltage AC adapter 220V
7. DC output voltage of 12 V.
8. Operating temperature range -15...+30 ° C.
9. Scaler size 95 mm X 45 mm.
10. Overall package dimensions 280 mm X 100 mm X 100 mm.
11. The total weight of the package - 720,
CE certification.
Warranty 2-5 years.
The following are more amazing facts about This Fish Scaler:
Scales fish easily and quickly
Minimizes the mess
Portable (Small enough to fit in your tackle box)
Light weight and very maneuverable
Soft Rubber handle for a comfortable grip
Unique blade design for safety will not cut or hurt operator when in use.
No maintenance required
Left or right-handed people can use it
On/off switch
Provided with a clip to hang when not in use
Clear cover snaps on and off for easy cleaning
Rust Resistant
1-5 years warranty as your desired
Clear cover snaps on and off for easy cleaning
Air vent to keep the unit cool and extend the life of the unit.
Clip provided to hang when not in use.
Specialty head extends out for hard to reach areas.
Rubber grip for comfortable fit.
Clear Cover to minimize the mess
Durable plastic will not rust.
Stainless steel shaft prevents rusting.
Power adapters for easy disconnect plug. (Accessories)
Here are some quick instructions on
HOW TO INSTALL OR REPLACE A SPECIALTY HEAD
* Make sure that the unit is not connected to the power source!
* Make sure that the clear plastic cover is removed.
* Insert the allen key and turn counter clock wise.
* Insert the specialty head.
* Insert the allen key and turn clock wise.
Turn each screw half a turn at a time.
INSTRUCTIONS ON HOW TO SCALE A FISH
1. Make sure that the unit is not connected to the power source!
2. Make sure that the specialty head is properly secured. Refer to instructions on
"How To Install Or Replace Specialty Head".
3. Install the clear protective cover.
4. It is very important to make sure that the unit is turned off and that you are working in a dry location.
5. Insert unit to it's power source.
6. Remove the velcro from the bag and wrap the velcro around both cables, this will keep the plug in place when operating the unit.
7. Place the fish on a fish holding board.
8. Familiarize yourself with the unit and it's power switch,
then hold unit firmly and turn it on.
9. Begin scaling at the tail of the fish with the unit's red arrow facing the head of the fish.
Proceed towards the head, putting continuous pressure against the grain of the scales. Do not push down on the fish, the direction of the force should be applied towards the head of the fish.
HOW TO CLEAN AND CARE FOR THE ULTIMATE FISH SCALER
1. Unplug the fish scaler from it's power source.
2. Remove the clear protective cover.
3. Wash the protective cover with water.
Do not machine wash or scrub with any material.
4. Use a moist cloth to wipe the fish scaler and it's specialty head.
Do not run water on the fish scaler.
This Fish Scaler scaled small and large fish so easily. This fish scaler completely remove the scales with out damaging the skin of the fish.
Patent protective,CE certified fish scaler
packing details:
1pc/bubble bag/color box
15pcs/carton
Carton meas:56*31.5*36cm
10.95/8.51kgs
6750pcs/20'FCL
