welded steel pipe

Edges of the Stainless Steel Plate cut to size are prepared and pre-bent followed by roll forming into pipes.It is prewelded and the final welding

Strength:
physical/mechanical, PMI, microscopic examination, etc^
Prime and genuine materials with co-relating original test certificates.

Supplementary Test:
Micro-Structure Analysis
Hot Tensile
Radiography Test
Ultrasonic Test...

Keywords:Welded Stainless Steel Pipe, 10" x 6M LG, SCH 40S, A312 TP316L.
Size: 10" (DN250).
Wall thickness:SCH 40S.
Material: ASTM A312 TP316L.

Categories:ASTM A312 Stainless Steel Pipe For Fluid Transport
Place Of Origin:Zhejiang
Brand Name:Ganyeah
Steel Grade: 300 Series
Type:Welded

STANDARD(GRADE):ASTM A554(MT304/304L, MT316/316L)JIS G3446(SUS304, SUS316)CNS 5802(304, 316)
O.D.:9.5mm~203.2mm
W.T.:0.6~5.0mm

GRADE 2507
High imperviousness to chloride stress consumption splitting
High Strength
Better resistance than chloride setting and cleft consumption

Can be strengthened by cold working [up to 4 times]
Easily welded
High ductility
Good corrosion resistance
Suitable for high temperatures

SS are significantly more resistant to oxidation by water than carbon steel and cast or ductile iron.This results in longer life time for Pipeline.

TEST CERTIFICATE :
We can provide ASTM A312 TP304 Stainless Steel Welded Pipes & Tubes Mill Test Certificate as per EN 10204 as per 3.1/3.2 TC

Main material:304\304L\316\316L\321\310S\317L\347H\S31803\2205\904L,etc.The produce are widely used in petroleum, chemical, paper, machinery

Minimum Order Quantity:1TON
Packaging Detail:plastic sacks or plywood case
Delivery Time:according to the product quantity
Supplying Ability:30000T

Welded Pipe :single slit(Φ8mm*0.5mm-Φ630mm*25mm); girth(Φ630mm*3mm-Φ3000mm*45mm)
Steel Grades: TP304, TP304L, TP304H, TP316, TP316L, TP316Ti

Pipe size range:
Outside diameter from 6mm to 2032mm
Wall thickness from 0.5mm to 38.1mm
Single length: 10mm-12000mm
Package:knitting strip bundle

Test: Eddy current/hydrostatic/ultrasonic/intergranular Corrosionor according to customer's request
Tolerance: Meet the standard

Purpose
(1) reduce the hardness and improve the cutting process.
(2) elimination of residual stresses, stable dimensions, reduced deformation

Resistant to fouling due to corrosion
Excellent high-end performance in both high and low temperature conditions, to name a few.

A554 - A554-98e1 - Specification for Welded Stainless Steel Mechanical Tubing.A554 are typically used for stainless steel mechanical tube application

Ornamental Tubing
ASTM: A554
Grades: 304/304L
Sizes: 0.625" - 4.500" Round
0.75" x 0.75" - 8.0" x 8.0"Square...

Austenitic stainless steel have a very wide range of applications, e.g. in the chemical industry and the food processing industry.

Packing: plywood boxes or plastic bundles
Shipment: By sea with FCL/LCL contianer or in bulk ;by airfreight,
Standard: ASTM A312

Large diameter (up to 100″) / heavy wall welded pipes (up to 60mm)
Unit length up to 12 mtrs with no circular joints
Pipes produced by plate

Excellent ductility and impact strength at both ambient and sub-zero temperatures.
Specified for pressure vessel applications.

Type: Welded Pipe
Size: 8 Inch (DN200)
Wall Thickness: Sch80
Length: 6 meters
Ends: Beveled Ends...

[Grade]ASTM A312
[Material]TP316L.
[Type]Welded stainless steel pipe.
[WT]SCH 40S.
[Size]10". ...

Our welded, welded and drawn tubes size range goes up to 38.1mm (1 1/2") OD. We can manufacture welded straight lengths up to 20m (65.6ft) .

Heilights:
Pipes up to 24" made in continuous production from coil
Pipes up to 80" made from single plates
Maximum thickness 40 mm

Production range
OD: 17.2 - 2032 mm (NPS 3/8-80)
Wall thickness: ≤ 50.8 mm (≤ 2")
Steel grade range
Austenitic / Super Duplex grades

Welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed.

Eletric-Fushion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe For High-Temperature Service and General Applications,