welded stainless steel

Pipes is commonly used in applications where a high resistance to corrosion, a low maintenance cost and versatility form part of the set requirements.

Austenitic stainless steel have a very wide range of applications, e.g. in the chemical industry and the food processing industry.

ASTM (American Society for Testing and Materials):A body of industry professionals involved in writing universally accepted steel material.

Display Desc:304 Stainless Steel Sanitary Tubing
Product Name:1/2″ × 0.065″ 304 Stainless Steel Sanitary Tubing
Length:20 ft
Weight Lb:.302

Outside diameter: 0.5-165.2 mm
Tolerances:+/-0.75% with a minimum of +/-0.02 mm (0.00079 in.)
Wall thickness:0.10-3.00 mm
Tolerances:+/- 10%

1.Wall thickness: 0.5-8mm
2.Outside diameter: 10-500mm
3.length:1m-6m
4.Preferential price, prim quality

Packing: plywood boxes or plastic bundles
Shipment: By sea with FCL/LCL contianer or in bulk ;by airfreight,
Standard: ASTM A312

Super size welded pipes (above 24", big size, heavy wall)
Welded heat exchanger tubes
Welded U-tubes / Welded U-bended heat exchanger tubes

Large diameter (up to 100″) / heavy wall welded pipes (up to 60mm)
Unit length up to 12 mtrs with no circular joints
Pipes produced by plate

Grade 310S electrodes generally recommended for fusion welding. AS 1554.6 pre-qualifies welding of 310 with Grade 310 rods or electrodes.

PROTECTIVE COATING TO BE SPECIFIED AS REQUIRED.
SPECIAL SURFACE FINISHES MAY BE SPECIFIED.
SPECIAL PACKING REQUIREMENTS MAY BE SPECIFIED.

REPAIR:SURFACE IMPERFECTIONS ARE ONLY REMOVED IF SPECIAL FINISH IS SPECIFIED.
SURFACE FINISH:FREE OF SCALE. SPECIAL FINISHES MAY BE SPECIFIED.

Excellent ductility and impact strength at both ambient and sub-zero temperatures.
Specified for pressure vessel applications.

Type: Welded Pipe
Size: 8 Inch (DN200)
Wall Thickness: Sch80
Length: 6 meters
Ends: Beveled Ends...

Satisfy our customers' needs and expectations
Make commitments we fully understand and believe we can meet
Meet all commitments to customers on time

Main Testing:
1.High pressure hydraulic Test: Minimum 10 Maps
2.Eddy current test, Ultrasonic Test
3.Mechanical Test
4.OD and WT tolerance Test

[Grade]ASTM A312
[Material]TP316L.
[Type]Welded stainless steel pipe.
[WT]SCH 40S.
[Size]10". ...

Our welded, welded and drawn tubes size range goes up to 38.1mm (1 1/2") OD. We can manufacture welded straight lengths up to 20m (65.6ft) .

Sunny Metal Group produces
stainless steel wire mesh
stainless steel wire netting
stainless steel filter screen
s.s.filter

All Standard Finishes
AS WELDED (ALL SIZES)
180 GRIT (1/2″-5″)
240 GRIT (1/2″ -5″)
320 GRIT (1/2″ -5″)...

TEST CERTIFICATE :
We can provide ASTM A312 TP304 Stainless Steel Welded Pipes & Tubes Mill Test Certificate as per EN 10204 as per 3.1/3.2 TC

Heilights:
Pipes up to 24" made in continuous production from coil
Pipes up to 80" made from single plates
Maximum thickness 40 mm

DIMENSIONS:Weight/Lineal Foot: 0.1051 pounds
Dimension Name:Value
OD:0.375"
Wall:0.028"
ID:0.319"

SUS201 stainless steel tubes; SUS202 stainless steel tubes; SUS304L stainless steel pipes, SUS316 stainless steel pipes, SUS316L stainless steel pipes

1.processing method:cold drawn,etc
2.corrosion and high-temperature resistant

 
ASTM 316 316L Large Seamless Stainless Steel Welded Pipes Sch 20 40</p

Production range
OD: 17.2 - 2032 mm (NPS 3/8-80)
Wall thickness: ≤ 50.8 mm (≤ 2")
Steel grade range
Austenitic / Super Duplex grades

Welded stainless steel tubeGood quality,Reasonable price,China's largest stainless steel manufacturers,Good service attitude,Top exporter

Stainless steel pipe 304 for food grade
Size: OD:20mm-150mm. Thickness: 0.3-2.5mm
Length:6m
Grade:300G,400G
Brand: JIANHUI

Tension Test:One test shall be performed on a specimen from one tube of each lot of 2500 ft (760 m) or fraction thereof from each heat of steel.