water flow valves

Chrome-Plated Flow Mixing Valve

1. Precision adjustable for flow control
2. Threads and subplate assembly option
3. Mineral oil as medium

* Flow control Valve
* RE Series Flow Control Valve;
* Pneumatic component
*Port Size:G1/8,G1/4,G3/8,G1/2

nickel plated RO brass needle valve.
water flow control valve for Reverse Osmosis system.
port size:1/4"X1/4".
RO brass needle valve made in China.

Using very small pressure drop, the valve can track loading pressure,control pump pressure, consume less power

1. Pressure 6000psi
2. Material:SS304,SS316, brass
3. Port size:1/8", 1/4",1/2", 3/4",1"
4. Male thread or Female thread
5. Thread: NPT, G, UNF

ZJHP Single Seat Pneumatic Flow Control Valve

Chrome-Plated Flow Mixing Valve

Solenoid valve with flow limit

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

Diaphragm Kits:K10200, K10201
Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
25% increase in flow over the industry leading 76MM valve

1.Medium:air
2.port size : 1/8 1/4" 3/8 1/2"
3.temperature range :-5-+55C
4.working pressure :0.05-0.95MPA

Big flow valve
fungible 2W,KSD,VX,CKD type valves.

1. Meter-in or meter out throttling adjustment control
2. With two throttle check valves
3. ISO, NFPA, ANSI Sandwich plate mounting

This water flow restrictor can adjsut up the water flow easily, it can be used the simple RO system without booster pump, and adjust the water flow ..

1.Operating Temperature Rang: -5~+100℃
2.Material of Body: Brass
3.Material of Oil Seal: PTFE
4.Operation Fluid Viscosity: 50 CST(Below)

Voltage: 220V ± 10% 50-60Hz
Medium: Chilled/hot water
Fluid temperature: 5 - 95 degrees

Electro-Hydraulic Proportional Relief & Flow Control Valve
Max Operational Pressure:25 Mpa ( 255 kgf/cm2 )
Max Flows:125 l/m

1.Long working life hand slide valve
2.Quality Ensure, 100% Tested
3.Good after-sell service
4.CE, ISO9001
5.Port Size:G1/8,G1/4,G3/8,G1/2

Komatsu suction valve, relief valve
excavator flow control valve, hydraulic valve
Apply to: PC200-7
part number: 723-40-91200

Ordering Code: KLA-06 KLA-08 KLA-10 KLA-15 KLA-20 KLA-25 KLA-32
Working Temperature: -5-50℃
Pressure range: 0.15-0.85 Mpa

1.Hardened poppet and seat for long life
2.Filter screen standard
3. Industry common cavity with standard compact size

Electro-Hydraulic Proportional Flow & Directional Control Valve
Max Operational Pressure:25 Mpa ( 225 kgf/cm2 )

.Laser marking is optional
.Spray painting or anodize
.Other color is optional
.Material:Aluminium Alloy

brass ball valve
ball valve
ball valve handle
best quality valve

Komatsu excavator relief valve
excavator flow control valve
Apply to: PC200-8 PC300-7
part number: 723-40-93600

1.Medium:air
2.Operating Temperature:0~60°C
3.port size :1/4"
4.pressure Range: 0~0.8Mpa

Body: brass
Normal close or normal open
Seals: NBR,EPDM or VITON

1. Easy adjustment for flow control
2. Little internal leakage to ensure the performance
3. 100% tested for each item, guarantee quality

proportional screw-in cartridge flow control valve
1.flow : 04=40l/min 06=60l/min
2.working pressure: 21 MPa
3.medium: oil