underground cable

B type cable entrance protection roller single roller .the roller can be placed in tube entrance at arbitrary angle .lockable .nylon roller .

Electric cable pulling winch is used for pulling underground cable in the trench or on the cable on the ground or tray.

80~200mm tube diameter C series cable entrance protection roller pulley block,three roller the curvature radius is 450mm, lockable ,nylon roller.

CABLE ROLLER is used for installation underground power cable or communication cables.

GYXTW53 underground Cable
ISO9001, SGS
life time:30years,100%test
excellent quality.

Corner Cable Rollers are used for installation of underground cable in the tunel with corner.

Electric High Voltage Power Cable HV / MV / LV / PVC / XLPE With Stranded Copper Conductor
 
 
 

CABLE ROLLER is used for installation underground power cable or communication cables.

Storage/operating temperature: -40 to +70°C
Complies with YD/T 901-2001as well as IEC 60794-1 standard

Cable rollers ,.Cable Sheaves,Hangers , Cable Guides,Straight line cable roller,Corner roller,Hoop Roller--Bazhou deli power tools
Specifications
Us

Used in the cable changing the direction place protection cable not to wear.
Corner Cable Drum Jacks
Name:Cable Roll

Cable rollers -of steel construction with zinc plating to be placed over pre-laid cables up to 150mm in diameter,work in trenches,for cable laying con

Cable rollers -of steel construction with zinc plating to be placed over pre-laid cables up to 150mm in diameter,work in trenches,for cable laying con

Cable roller/ Cable laying roller/ aluminum roller for running underground cables. It has a steel roller fitted with ball bearings.

Cable rollers -of steel construction with zinc plating to be placed over pre-laid cables up to 150mm in diameter,work in trenches,for cable laying co

1.Light weight, durable, resistance to acid and alkali, aging resistant, corrosion resistant.

Outdoor Armoured Communication Cable for Underground Application

P3 500 UNDERGROUND CABLE
Center Conductor: 2.77+0.01mm Solid Copper/Copper Clad Aluminum

Cable rollers -of steel construction with zinc plating to be placed over pre-laid cables up to 150mm in diameter,work in trenches,for cable laying con

Cable rollers -of steel construction with zinc plating to be placed over pre-laid cables up to 150mm in diameter,work in trenches,for cable laying co

Cable socks are manufactured from high tensile galvanised and stainless steel wire rope .sometimes called cable stockings or cable grips, Pulling grip

Cable roller/ Cable laying roller/ aluminum roller for running underground cables. It has a steel roller fitted with ball bearings.

conductor single and double socks for stringing electric power ,communication ,optical fiber cable .

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.

1.High impact resistance
2.Corrosion resistance, FRP pipe
3.low temperature resistance, FRP pipe
4.ISO

Duct rodder For conduct and clean of the underground cable installation

The electric motor driven cable pushers are used for installation of big power cable in even speed. The rubber caterpillar of cable pusher.

1. strong non-conductive fiberglass rod construction
2. fiberglass duct rodderstainless steel drawing head
3. Afor longer conduit runs and undergrou

Hydraulic cable reel elevator is for supporting large cable reel stand construction