tube

this type heater can heat up very fast with specifications of low thermal hysteresis, evenly heating, far heat radiation distance, fast heat transfer.

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

shortwave infrared heater lamps with white reflector can save more energy and help clients to realize the good result in a shorter time.

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

Cathodic protection MMO Titanium tubular fill with petroleum coke anode are to be designed & manufactured by Xi'an Taijin company.

Pipe DIN1629 GR.St52.0 for manufacturing pipeline, vessel,equipment,pipe fittings and steel structures
NPS:1/2"-36" THK:SCH10-XXS L.:5-14m

Structural Pipe DIN1629 GR.St44.0 for manufacturing pipeline, vessel,equipment,pipe fittings and steel structures
OD:1/2"-36" T.:SCH10-XXS L.:5-14m

Red Round Cylinder Custom Paper Tubes with Tinplate Lids for Wine Bottoles, Wine Packing
 
<table border="0" cellpadding=

Red Round Cylinder Custom Paper Tubes with Tinplate Lids for Wine Bottoles, Wine Packing
 
<table border="0" cellpadding=

SA213-TP304H , NPS 2'' X SCH80S, continuous helical welded heat exchanger fin pipe Quick Detail: 

ERW carbon steel pipe tube /ERW steel welded pipe/
ASTM A53/API 5L Gr.B Carbon Steel Welded ERW Pipe
ASTM A53 GR.B ERW sch 40 carbon steel tube

1. 99% MGO
2. Thermocouple bushing
3. Length was about 20cm
4. Resist high temperature, thermal conductivity , insulate
5. Protect thermocouple

Material: Carbon steel, S/S
Thread E:Z1/8"x27 to Z2"x11.5
Thread F: Z1/8"x27 to Z2"x11.5
Pressure:30 to 50Mpa
Medium: Gas, Water, Oil...

Standard:API, ASTM, DIN, API 5L, ANSI B36.10M-2004, ASTM A106-2006, ASTM
Thickness:0.49 - 100 mm
Type: welding
Section Shape:Round

Standard:API, ASTM, DIN, API 5L, ANSI B36.10M-2004, ASTM A106-2006, ASTM
Thickness:0.49 - 100 mm
Section Shape:Round
Outer Diameter:13.7 - 610 mm

316 / 316L welded pipe is used for pressure operations to move liquids or gases in water treatment, waste treatment, petrochemical, chemical

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000Hs
5.Max overall length: 6400mm

medium wave infrared heater lamp
1.Heating filament : NiCr
2. Section of quartz tube: 15mm
3. Max Temp: Up to 750 Degree C

------Advantages
a. Quick temperature rising,
b. Long transfer of heat radiation .
c. Long life,
d. Fast heat exchange rate

SSAW steel pipe API 5L/ASTM A252/EN10219/AS1163
Welded Pipe Ssaw Spiral Welded Steel Carbon Steel Galvanized Mild Steel 5L X52 ST37

Thread E:9/16" to 2"x12
Metric Tube O.D.:6mm to 38mm
Inch Tube O.D.:1/4" to 1.1/2"
Surface: Cr6+ free zinc plating
Salt spray test:>=120 hours

Standard:ASTM, AISI, DIN, EN, GB, JIS
Thickness: according to customer requirements
Model Number:316L
Type:Welded
Steel Grade:300 Series

Shortwave Lamp
1.lead wire : Teflen , High Temperature Resistant wire
2. Response time: 1 second
3. Max Temp: Temp of heating element: 1800-2400℃

1.Plastic one-touch fitting
2.Using on Pneumatic system
3.Smooth-Edge release sleeve design facilitates a quick tubing disconnection
4.Model:PB

Steel pipe combination tower, Steel tube combination tower, Transmission line tower, Transmission line steel tower, Electrical Transmission Line Tower

1. Short Pipe Tee Joint for Gravity Casting.
2. Use for connecting components.
3. Material: Aluminium Alloy.
4. For water, oil, gas etc transport.

Electric water heating elements are widely used in domestic or commercial water dispenser,coffee machines,water and oil heaters,showers

There are two basic types of infrared radiant heaters.
1. Luminous or high intensity
2. Radiant tube heaters

This is oil drilling equipment parts, one drill pipe connected with another through this part when drilling,it's carbon steel with heat treatment.

*Dimension:L1198xW16xH30mm
*Color Rendering Index: 70-85
*Voltage:AC100V-240V
*High-quality Aluminum,high power