transmission

Zoom Sag Scope is used for adjusting the sag of overhead transmission line, during the conductor or Earth Wire, OPGW sagging operation.

Conductor Socket Joints (Cable Socks Pulling Grips) are used to hold the overhead cables in transmission line stringing operation.

Ground wire come along clamps are used for gripping ground wire (stranded earth wire) on overhead transmission line. The special jaw can grip tightly.

Drones of stringing pilot rope for overhead transmission line can improve the efficiency of stringing power lines while reducing expense.

230KV Overhead Transmission Line Stringing Equipments are used for Two conductors or OPGW stringing, with 9 ton puller and 8 Ton (2x40KN) Tensioner.

750/765 KV Overhead Transmission Line Stringing Equipments are used for six conductors stringing, with 25 ton Hydraulic puller and 24 Ton Tensioner.

18 Ton Hydraulic Winch Puller is used for overhead transmission line two or four conductors stringing. The machine is equipped with Cummins Engine.

916MM Overhead Power Line Conductor Stringing Blocks are used for transmisson line conductor or OPGW stringing. The conductor sheave is made in Nylon.

110KV Overhead Transmission Line Stringing Equipment is used for single conductor or OPGW stringing, the big set can be used in mountain area.

66KV Overhead Transmission Line Stringing Equipment is composed of 4 ton puller with tensioner, and accessory tools for single conductor stringing.

3 Ton Hydraulic Cable Tensioner is used for single conductor or OPGW stringing on overhead transmisson line. It is equipped with diesel engine.

132KV Overhead Transmission Line Stringing Equipments are used for single conductor or OPGW stringing, The big set can be used in mountain area.

150KV Overhead Transmission Line Stringing Equipments are used for Two conductors or OPGW stringing, The set can be used in mountain area.

26MM Anti Twist Steel Wire Rope is used for 4 or 6 bundled conductors stringing on overhead power lines. It is braided from 5.4 mm galvanized strands.

Motorised Winches are used for tower erection,material lifting and cable sagging or pulling operation in overhead power line construction project.

Wrenches are used for tightening hexagonal tower bolts or foundation bolts, or bolts on come along clamps in power line construction project.

Spacer Trolleys and Overhead Lines Bicycles are special tools widely used in transmission line maintenance and accessory installation operation.

Aluminum alloy come along clamps are used for stringing aluminum conductors on overhead transmission line. Our clamps are produced with special jaw.

22 Ton Hydraulic Winch Puller is used for overhead transmission line four or six conductors stringing. The machine is equipped with Cummins Engine.

Hydraulic Pulling Equipment is used for overhead transmission line stringing, which is used for pulling conductor or OPGW in stringing operation.

660MM Overhead Conductor Stringing Blocks are used for overhead transmisson line conductor or OPGW stringing. The sheave is made in aluminum alloy.

Running out Blocks are used for overhead conductors stringing on distribution and transmission power lines. All the sheaves are mounted on bearings.

We designed a few typs of Helicopter Stringing Pulley Blocks according to our customer's requirements. They are used for 1-4 conductors stringing.

20 Ton Hydraulic Tensioner is used for four or two conductors stringing on 500 KV transmisson line. It is equipped with Cummins diesel engine.

1040MM Overhead Cable Stringing Blocks are used for 800 or 1000 KV transmisson line conductor or OPGW stringing. The conductor sheave is made in Nylon

Ground Wire Stringing Blocks are used for overhead transmisson line Earth Wire or OPGW stringing. The sheave is made in steel or Nylon.

508MM Overhead Cable Stringing Blocks are used for overhead transmisson line conductor or OPGW stringing. The sheave is made in aluminum alloy.

The electronic or hydraulic dynamometer is used to measure the tension force in the power transmission line while stringing or sagging operation.

Three sheaves conductor pulleys are used for two or three conductors stringing on overhead transmission lines. The conductor sheaves are made in nylon

Alloy steel come along clamps are used for stringing aluminum conductors on overhead transmission line. Specially for ACCC conductor with long jaw.