transformer oil tester

- GDJ-ⅡInsulating Oil Tester is produced according to IEC60156 Standard .
- The parameters are set in advance with the adjusting switch

GDJJ-II 80KV Dielectric Oil Breakdown Tester is produced according to the National Standard GB-86 Determination Method

Lubricating Oil Rust Characteristics Tester is suitable to determine rust-preventing characteristics of inhibited mineral oil.

made in china wuhan city, huaying electric power.

for engine fuel/solvent oil/light petroleum products is used to determine distillate of engine fuel, solvent oil, and light petroleum products.

The instrument is designed and made as per DL/T 706-99, and IEC 79-4:95. It is used to determine the lowest temperature when fire resistant oil combus

It is applied to measure dielectric loss angle and Volume Resistivity of insulating oil etc.

with hi-technology, this oil tester is easy and safe to be operated. It has function of testing the viscosity of petroleum products.

Breakdown test of user-defined
Proof test
Calibration interface for customers
Unloading data to PC and making word report automatically

GD-260A Moisture Content Tester is suitable to determine water content in the petroleum products and lubricating grease.

made in china wuhan city, huaying electric power.

This instrument is designed and made as per standards GB/T 11143 Standard test method for rust-preventing characteristics of inhibited mineral oil .

The instrument does not applies to insulating oil containing antioxidant, whose viscosity is bigger than 12mm2/s at 40℃

It is applied to measure dielectric loss angle and Volume Resistivity of insulating oil etc.

with hi-technology, this oil tester is easy and safe to be operated. It has function of testing the viscosity of petroleum products.

GDJJ-II 80KV Dielectric Oil Breakdown Tester is produced according to the National Standard GB-86 Determination Method for Dielectric Strength

GD-4929 Oil Bath dropping point tester of lubricating grease
It is suitable to determine dropping point of lubricating grease

This moisture content tester is used to determine the water content (50 to 1000 ppm) in lubricating oils.

AC AC/DC hipot tester

v

GDJ-ⅡInsulating Oil Tester is produced according to IEC60156 Standard .

1. Tangent delta value measurement for insulating oil
2. Capacitor value measurement for insulating oil
3. Temperature control for insulating oil

This automatic oil water content tester is suitable to test the water content in the liquid petroleum products.

This testing instrument is mainly used to measure the open cup flash point of petroleum products. It is featured by high accuracy and good quality.

1.Standard:ASTM D1401 ,GB/T 7305
2.High resolution
3.favorable price

v

It is suitable for the asphalt penetration test and grease (or oil fat) cone into the degree of testing. The instrument can also be used for solid.

conforms to standard ASTM D2274

This dropping point tester is applied to test the dropping point of lubricanting grease over 100 degree centigrade.

The instrument is designed and made as per the National Standard GB/T4929 "Test Methods for Dropping Point of Lubricating Grease