terminals

1.Application: aerial, direct-burying, wall-mounting, Pipeline laying way.

1.Fuse terminal block 801, its pitch is 10.0mm.
2 screw called one pin. we could proudce 2pins to 10pins .
3.it is 300V 6.3A.

TFT Screen Finger Enrollment Attendance Terminal
*For employees attendance tracking
*With simple access control function
*GPRS/Wifi support

Part Name:
UK3 Screw Terminal Block
Wire Range:
0.2-4.0 mm2/28-12AWG
IEC

1.Screw terminal block
2.It is 950A, pitch is 7.62mm
3.We often produce green and gray color
4. it often produce 2p and 3p .
4.30A

pluggable terminal block 2EDGVH,pitch is 5.0/5.08mm. it is female, which work together with 2EDG. it got UL,CE and ROHS .etc. it is 300V and 15A.

Car Battery terminal w/ adaptors for pos/neg (gold)

1.PCB terminal block 301
2.Pitch is 5.0mm
3.We often produce 2p and 3p.
4. Blue , black color is often produced as usual.

Aluminum compression terminals cable to flat SY
1.Material:Cast aluminum
2.short deliver time

Article:
4-Conductor Through Terminal Block(Side-Marked)
Wire Range:
0.2-2.5mm2/24

1.screwless terminal block 250A
2.pitch 3.50mm
3.there are A type and B type .
4.Color is Gray , yellow and .....
5.there are CE, UL

With Simons Contacts,high contact reliability

gold plating terminal for medical equipment
Material: stainless steel
Property: good welding, tenacity
Design: custom design
Finish:gold plating

This silicon rubber 20kV and 24kV cable terminal is applicable for connecting of 24kV 25mm2 to 400mm2 cable and electrica equipments

1.Feed through terminal block 12H.
2.there are brass and zinc alloy.
3. its pitch is 12.0mm.
4.we could produce pins from 1 to 12

1.screw PCB terminal block 301
2.its pitch is 5.0mm .
3. it got UL, CE, VDE and ROHS certification.
4.We could put 2p and 3p

1.pluggable terminal block HT396V
2.it is male and vertical type.
3. picth is 3.96mm.
4.it is work together with Female HT396
5.Yellow

This terminal block is a proven, economical connecting block solution for category 5e network cabling.

（two terminal) OXYGEN CONCENTRATOR

pluggable terminal block HT396K,pitch is 3.96mm. it is Female, which work together with HT396V/R . its color often is yellow and green. it got UL,CE .

1.Transformer terminal block TS4.
2.its pitch is 13.0mm and color is orange.
3. It got UL certification.
4.It could be through 20A and 300V.

1.Euro screw terminal block 950
2.pitch is 9.50MM
3. it got UL ,CE, etc .
4.300v 30A .
5. Housing material is PA66,UL94V-0

1. pluggable terminal block HT396R
2.Pitch is 3.96mm
3.Right angle and male.
4.HT396R often work together with HT396
5.Yellow or green.

1.Transformer terminal block TSB2.5.
2. its pitch is 9.50mm and color is orange.
3. It got UL certification.It could be through 10A and 300V.

1.PCB screw terminal block KF332K.
2.its pitch is 5.0mm,which work together with KF332J.
3. we could proudce from 2 pins to 24 pins.It got

Copper terminal lug type for electric wire
1.Strong Fastening
2.Simple Application Method
3.High Conductivity
4.OEM & ODM Service

MDF is used on the horizontal side, which is used for the termination between internal lines and jumper wires. It adopts the IDC connection methods

1.Fuse terminal block 801
2.its pitch is 10.0mm. . It got CE certification. It is PA66,UL94V-0.
3. Voltage is 300V ,and currrent is 6.3A..

1.PCB terminal block 330
2.Pitch is 5.0mm
3. we often produce blue color .
4. We could produce from 2P to 24P .
5.it got ce, UL .

Series User Terminals