swing type valve

Design manufacturing: according to ASME B16.34
Flange size: according to ASME B16.5 and GB/T9113.6
Inspection standards: API598

Rated stroke deviation of KHPM type electric pressure regulating valve, a straight stroke electric actuator and low flow resistance .

you can open and close the valve only to change the negative and positive of the power, it is welcomed by its stable performance and long service life

The product is a rotary type valve,
good sealing performance,
flow coefficient,
flow resistance coefficient is small,
simple structure.

Ductile Iron Small Type BS5163 Resilient seated Gate Valve PN10,PN16,DN50-DN300,

4203 WAFER TYPE DOUBLE DOOR CHECK VALVE
SIZE:DN50-DN800
PRESSURE RATING:PN16/CLASS125
WORKING TEMPERATURE:-20-110&-10-80 DEGREE

1.Ambient Temperature: -5~55℃
2.Relatively Humidity: <85%
3.Working Medium: Clean Air
4.VoItage: AC110V/AC220V/DC24V

XF1 is Direct action type Solenoid Valve for Carbamide ,Body Material made by 6061-T6 ,With H Class coil and IP 65 ,Supplier Xingyu Electron (NINGBO)

The PPF Gate Valve is one of wellhead gate valve designed and manufactured according to API 6A specification with 2000-15000 psi working pressure.

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

1. Ordering Code: CA-25DD
2. Repair kits: K2501, K2503
3. Structure: Dress nut type pulse valve
4. Port size: 1"

TR575,TR500,TR501,TR570,TR571,TR572,TR573,TR574

stainless steel pin type fixed spray valve

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

Lined PFA Ball Check Valve
1) Size 2" Up to 48", Class 150-2500
2)Face to Face API609
3)End Connection: RF...

1.Pn16 Wafer Type Butterfly Valve
2.Ductile Iron Wafer Type Butterfly Valve
3.Cast Iron Wafer Type Butterfly Valves
4.Wafer Type Butterfly Valve

API6A M Type Expanding Gate Valves
Bore Size: 2-1/16" to 4-1/16"
Working Pressure: 2000 PSI-5000 PSI
Material: AISI4130 Forged
EE, X.Y, PSL3, PR1

High pressure ball valve
Male thread join or Flange connection
Main usage: Marine
DN 10, Thread: M52X2

open and close the valve only to change the negative and positive of the power,Medium: Steam, hot water, air, oil (below 20cst)
Sealing material: NBR

Brass Angle Valve Stope Type Forged Body Chromed Plated.
Size:1/2X3/8
1/2X1/2

ZMQSY series pneumatic diaphragm type Y valve is the company according to the equipment of thermal power plant .

pneumatic valve, air cylinder, pneumatic component
MHS Pneumatic Thin Type Ball Valve
Working pressure:1.6-4.0Mpa
Temp. Range:-20--232degree----350

Size: 2" ~ 36" (DN50 ~ DN900)
Rating: ANSI 150lb ~ 600lb
Body Materials: Stainless Steel
Disc: Stainless Steel
Seat: 304+graphite

2/2 way piston type ,0-610BAR ,pipe tye Φ17 brass body , NBR seal ,14mm orifice,,24VDC/20W

CHEKE VALVE USED IN XMAS TREE FOR CONTROL FLOW DIRECTION, LIFT TYPE,FORGED BODY,SIZE 2-1/16"~4-1/16",WP21Mpa~105Mpa

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

3 7/8" sleeve type drain valve manufactured by ZZ TOP as per the standards NACE MR 0175 for the full H2S service.

1.Carbon Steel
2.PARKER 3000 With Teeth
3.Poppet valves available to prevent uncoupled leakage
4.300,000 times plug in and out tested
5.OEM

1.Pn16 Double Flange Centreline Butterfly
2.Ductile Iron Double Flange Centreline Butterfly
3.Cast Iron Double Flange Centreline Butterfly

T or L type 3 way ball valve 1000 PSI