swing check valve

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Brass Check Valve with Stainless Steel Filter
MOQ:3000pcs
PN20
Size:1/2"-4"

Brass Check Valve with Stainless Steel Filter
MOQ:3000pcs
PN20
Size:1/2"-4"

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

Brass spring check valves.Check valve.non return valves.
Norminal Pressure:1.6MPa.
Working Medium:Water.
Working Temperature:-20℃-150℃.

high pressure
competitive price
good quality

with check valve magnetic suction filter series
INTRODUCTION
The series filters can be installed on the top or at the side of the tank.

JIS Marine Bronze Lift Check Valve---F7356 5K to 16K

Double Check Valve
HV-CV11
Original No: 280809

Truck Single Check Valve
HV-CV08
Original No: 10200

K3V180DT Short check valve
Used in: K3V180DT hydraulic main pump
Part Number: 704550A

check valve , valves , Dual Plate Check Valve

check valve , valves , Forged Steel Check Valve

 
800 Series BS4504 PN10 / PN16 Flange Standard 2" - 24" Wafer Check Valve</sp

1.Standard Porting pattern Sandwich plate design
2. Three different cracking pressures optional
3. A or B as leak-free blocking in channel

1. One or two actuator ports for leak free closure, optional
2. Vertical stacking assemblies
3. ISO and NFPA standard mounting

Bronze Y-strainer check valve with stainless steel filter.

Bronze swing check valve with bronze body and bonnect, brass swing.

Check valve

Modular Throttle And Check Valve MSA
MSA-03-X
MS:Model
A:Control line A:A line B: B line T: T line W: A.B. lines
03:Port size...

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

LCAH series pilot-controlled check valve
Fluid Temp:-20~70
Pressure:31.5(Mpa)

Wafer Lift Type Check Valve