steel residential doors

Residential Bottom Bracket
DEC: Residential Bottom Bracket
Both left and right available
Thickness: 2.5mm
Finish: zinc plated

aluminum

Description: Side Brackets
The bracket is provided with slotted holes and suitable for the fixing of tracks
Thickness:2.5mm
Finish:zinc plate

Residential Top brackets
For use with double track door and suitable for 11mm shaft
Thickness:2.5mm
Finish:zinc plate

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5m

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

CABLE DRUM 120 HL
RATED LIFTING WEIGHT PER DRUM:500 LBS
MAXIMUM CABLE DIAMETER:3/16" SET SCREWS INST

USE ON NON INSULATED DOOR PANELS
3" INSIDE DIAMETER
INCLUDES FASTENER & GASKETS

INSIDE NYLON T HANDLE,PLASTIC INSERT,REINFORCED NYLON,MATTE BLACK FINISH,USE WITH AUTO LATCHES AND KEYED T HANDLES, USING EITHER CABLE OR CHAIN

DEC:Plastic Bearing
The interior diameter is 25.4mm

DEC:Left & Right Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Suitable for residential

<

STANDARD LIFT - CABLE DRUM 18'MAXIMUM DOOR HEIGHT:18' 1"
RATED LIFTING WEIGHT PER DRUM:750 LBS
MAXIMUM CABLE DIAMETER:3/16" (5mm)

18 GAUGE HINGE # 1
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

18 GAUGE HINGE # 4
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Double Track Top Bracket
DEC :Double Track Top Bracket
For use with double track door and suitable for 11mm shaft
Thickness:3mm
Finish: zinc plate

5#Hinge
GDP1005
DEC:5#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC: Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.
Thicknes

DEC:Small Size Pusher Spring
The is Provided with 2 Inch rubber stop for use small door pusher
Thickness:2.5mm
Finish:zinc plate

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

3-3/4' " spring fittings sliding thread
Max. wire size: 0.406" diameter
set includes 1 winding and 1 stationary
color coded winding fittings

1-3/4" Spring fittings
Max.wire size:0.295" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screws