steel plate sheet

CNC Press Brake with DA52 controller
CE,ISO,SGS Certificate
Siemens Moter
Bosch Pump and Bosch Valve
Max. Capacity 63T,Max Length 2500mm

Incoloy 864 Sheet:thermal stability and resistance to fatigue ,salt corrosion, pitting and chloride stress-corrosion cracking.Thickness: Min0.05mm

CNC Press Brake with DA52 controller
CE,ISO,SGS Certificate
Siemens Moter
Bosch Pump and Bosch Valve
Max. Capacity 40T,Max Length 2200mm

Inconel MA754 Sheet is nickel-chromium alloy with excellent strength, corrosion resistance and micro-structural stability. Thickness: Min0.05mm

CNC Press Brake with DA52 controller
CE,ISO,SGS Certificate
Siemens Moter
Bosch Pump and Bosch Valve
Max. Capacity 30T,Max Length 1600mm

Invar 36 sheet: nickel-iron alloy 36: possessing a rate of thermal expansion one-tenth that of carbon steel at temperatures up to at 400ºF(204ºC).

1.Estun E21s Control
2.1250KN pressure, 6000mm bending length.
3.3mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

Inconel 751 Sheet:a nickel-chromium alloy,has excellent physical, mechanical,resist attacking and corrosion-resistance properties.Thickness: Min0.05mm

1.Estun E21s Control
2.1250KN pressure, 5000mm bending length.
3.4mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

Inconel 690 Sheet has excellent corrosion resistance,high strength, good metallurgical stability and favourable fabrication.Thickness: Min0.05mm

1.Estun E21s Control
2.1600KN pressure, 2500mm bending length.
3.8mm thick for steel, and 6mm thick for stainless steel.
4.BOSCH Hydraulic System

Inconel 617 Sheet (Plate Strip): high-temperature strength,resistance to oxidation, corrosive environment, reducing and oxidizing.Thickness: Min0.05mm

1.Estun E21s Control
2.1250KN pressure, 4000mm bending length.
3.4mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

1.Estun E21s Control
2.1250KN pressure, 3200mm bending length.
3.6mm thick for steel, and 4mm thick for stainless steel.
4.BOSCH Hydraulic System

5 Alloy Sheet: corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and organic acids. Sheet Thickness: 0.05mm and above

1.Estun E21s Control
2.1000KN pressure, 2500mm bending length.
3.5mm thick for steel, and 3mm thick for stainless steel.
4.BOSCH Hydraulic System

Incoloy 25-6HN Sheet:a super-austenitic stainless steel,it's thermal stability and it can resistant to stress corrosion cracking.Thickness: Min0.05mm.

1.Estun E21s Control
2.1000KN pressure, 3200mm bending length.
3.5mm thick for steel, and 3mm thick for stainless steel.
4.BOSCH Hydraulic System

Highly resistant to chemical corrosion & oxidation; high stress-rupture strength & low creep rates under high stresses at temperatures up to 1500°F.

1.Estun E21s Control
2.400KN pressure, 2200mm bending length.
3.2mm thick for steel, and 1mm thick for stainless steel.
4.BOSCH Hydraulic System

Monel R-405 Sheet:good corrosion-resistance,weld ability and high strength.resistant to sea water,steam salt and caustic solutions.Thickness:Min0.05mm

1.Estun E21s Control
2.630KN pressure, 4000mm bending length.
3.2mm thick for steel, and 1mm thick for stainless steel.
4.BOSCH Hydraulic System

Incoloy 801/802/803 Sheet is a high nickel alloy with high temperature resistant tensile strength ,Resistance to oxidation, reduction, nitriding .

1.Estun E21s Control
2.800KN pressure, 3200mm bending length.
3.4mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

Inconel C-276 Sheet:resistant general corrosion, stress corrosion cracking, pitting and crevice corrosion in severe environments.Thickness: Min0.05mm

1.Estun E21s Control
2.800KN pressure, 4000mm bending length.
3.3mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

Copper Nickel CuNi6 Sheet is a Cu-Ni resistance alloy ,this alloy has low electrical resistivity and is solderable strip: Thickness:0.05mm above.

1.Estun E21s Control
2.630KN pressure, 2500mm bending length.
3.3mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System

Nitinol alloys exhibit two closely related and unique properties: shape memory and super-elasticity (also called pseudo-elasticity).

1.Estun E21s Control
2.630KN pressure, 3200mm bending length.
3.3mm thick for steel, and 2mm thick for stainless steel.
4.BOSCH Hydraulic System