steel garage door

 
High Precision Garage Door Track T Bracket Stamped Steel Parts OEM
 
 
Specific

 
High Precision Garage Door Track T Bracket Stamped Steel Parts OEM
 
 
Specific

‧KEYED T HANDLE,BRIGHT CHROME FINISH 
‧1 3/16" LONG BLIND MOUNT POSTS FOR 1 3/8" THICK
   DOORS 
‧ZINC PLATED 5/16" SQUARE X 3 3/4" LON

 
High Precision Carbon Steel Heavy Duty Garage Door Rollers with Zinc Plated
 
 
<p

 
High Precision Carbon Steel Heavy Duty Garage Door Rollers with Zinc Plated
 
 
<p

54" cable drum(Garage Door)
HIGH LIFT - CABLE DRUM 54 HL-54"
MAXIMUM DOOR HIGH:120" + HI LIFT
RATED LIFTING WEIGHT PER DRUM:275 LBS

 
Metal Stampings Zinc Plated Steel Garage Door Center Bracket Custom Made
 
 
<

 
Wear Resistance Sliding Garage Door Rollers Nylon Or Steel for 2 inch Track
 
 
<p

54" HL cable drum (3 Screw) EUR.GARAGE DOOR PARTS
HIGH LIFT - CABLE DRUM 54 HL - LD54" 3Screws
MAXIMUM DOOR HIGH:180" + HI LIFT
RATED LIFTING

 
Yellow Handle Steel Garage Door Lock Parts Short Run Metal Stamping
 
 
<strong

 
Wear Resistance Sliding Garage Door Rollers Nylon Or Steel for 2 inch Track
 
 
<p

HIGH LIFT - CABLE DRUM 54 HL - LD54"
MAXIMUM DOOR HIGH:180" + HI LIFT
RATED LIFTING WEIGHT PER DRUM:500 LBS

 
Yellow Handle Steel Garage Door Lock Parts Short Run Metal Stamping
 
 
<strong

DEC: Industrial Joint Angle Iron
The angle iron is made of 2.5mm steel and is provided
with slotted holes and suitable for the fixing of track.

DEC:Left & Right Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Suitable for residential

DEC:Rotary Joint
Include screw
Finish :black zinc plated

CABLE DRUM 12'
MAXIMUM DOOR HEIGHT: 12' 1"
RATED LIFTING WEIGHT PER DRUM: 375 LBS
MAXIMUM CABLE DIAMETER: 5/32"(4mm)

32" cable drum(Overhead garage Door)
STANDARD LIFT - CABLE DRUM 32'
MAXIMUM DOOR HEIGHT:32' 1"
RATED LIFTING WEIGHT PER DRUM:1000 LBS

18 GAUGE HINGE # 1
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

5#Hinge
GDP1005
DEC:5#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC: Industrial Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.

‧11 GAUGE HINGE # 1 ~ # 12
‧BRIGHT ZINC PLATED 11 GAUGE STELL HINGE LEAVES
‧FULL BODY 3" WIDE ‧FOR USE WITH 7/16" DIAMETER STEM ROLLERS

DEC:Small Size Pusher Spring
The is Provided with 2 Inch rubber stop for use small door pusher
Thickness:2.5mm
Finish:zinc plate

PUSHER SPRINGS 27"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 27".15" COMPRESSION

2"black nylon rollers
4" zinc plated stem
rating 50 lb lading at 100000 8" door cycles

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

Track Bottom Bracket
DEC: Track Bottom Bracket,The bracket is suitable for inside cable fixing for 2 "tracks
The advised max door weight is 100kgs

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5mm
Finish